300-625 Practice Test Questions Answers Updated 72 Questions [Q17-Q32]

5/5 - (2 votes)

300-625 Practice Test Questions Answers Updated 72 Questions

300-625 dumps & CCNP Data Center Sure Practice with 72 Questions

NEW QUESTION 17
Refer to the exhibit.

What is the result of the configuration?

No-drop CoS values are advertised by the DCBX.

LFC is prioritized over PFC on Ethernet 1/10.

PFC operates on Ethernet 1/10 regardless of the capability of the peer.

PFC fails to operate properly unless LFC is disabled on Ethernet 1/10.

Section: Implementation

NEW QUESTION 18
A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)

On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.

The QoS policy must be identical to other Cisco FCoE switches in the network.

On the Cisco MDS, the MTU is set equal to 2112.

VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.

FCoE is already enabled on a Cisco MDS switch.

NEW QUESTION 19
What does an unlicensed DCNM SAN fail to display?

Fibre Channel, FCoE, and iSCSI topologies

events and fault management

historical performance monitoring

real-time performance monitoring

NEW QUESTION 20
Drag and drop the boot issues from the left onto the correct solutions on the right.

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/troubleshooting/guide/b_Cisco_Nexus_9000_Series_NX-OS_Troubleshooting_Guide/b_Cisco_Standalone_Series_NX-OS_Troubleshooting_Guide_chapter_01.html#reference_7F7ADD86A12B4D2389E478280BE037A0

NEW QUESTION 21
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?

NTP must be configured on all devices or the configuration fails.

The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.

All switches on the fabric must be configured for the same password.

Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.

NEW QUESTION 22
Which item is a component of Cisco DCNM?

Cisco DCNM for SAN and Cisco DCNM for LAN

Cisco DCNM for Cisco UCS Manager

Cisco DCNM for B- and C-Series servers

Cisco DCNM FabricPath license

NEW QUESTION 23
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?

ROMMON

BIOS

NX-OS

BASH

Section: Deployment

NEW QUESTION 24
Refer to the exhibit. A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?

1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.

1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.

1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range.

1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.
2. Activate the zone set Zoneset10-A.

NEW QUESTION 25
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?

management server

fabric controller

name server

time server

NEW QUESTION 26
Which EtherType is used by the FCoE Initialization Protocol?

0x8913

0x8914

0xfc0e

0x8906

NEW QUESTION 27
Which three features are part of Cisco DCNM for SAN Advanced Edition? (Choose three.)

federation and VSAN scoping

VM-aware discovery and path analysis

fabric performance monitoring

event lookup

VSAN zoning

NEW QUESTION 28
Which configuration is available only in Cisco DCNM-SAN Advanced mode?

IVR

VMpath configuration

zoning

template-based provisioning

NEW QUESTION 29
A storage network engineer must install and configure a new MDS switch in a data center network. Which two statements about available choices during the MDS switch initial setup are correct? (Choose two.)

The engineer can choose what will be the administrator account.

The secure password standard is required.

The engineer can configure the default zone policy.

The engineer can configure the default switch port trunk mode.

The engineer does not have the choice to enable or disable full zoneset distribution.

NEW QUESTION 30
A storage administrator manually configures a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID.
What is the reason why the configuration is not working?

Static domain IDs apply only after a switch is rebooted.

The disruptive keyword was not used on the command.

Build fabric notifications were not sent to the other switches.

Domain manager fast restart is not enabled on the switch.

Section: MDS Troubleshooting

NEW QUESTION 31
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were derived on the right.