Get 2025 Most Reliable Juniper JN0-363 Training Materials [Q48-Q63]

4/5 - (1 vote)

Get 2025 Most Reliable Juniper JN0-363 Training Materials

The Realest Study Materials JN0-363 Dumps

Juniper JN0-363: Service Provider Routing and Switching, Specialist (JNCIS-SP) is a certification exam designed for professionals who wish to enhance their skills in delivering and managing Juniper Networks service provider networks. JN0-363 exam is designed to test the candidates’ knowledge and skills in configuring and managing Juniper Networks routing and switching technologies in a service provider environment. The JNCIS-SP certification exam is a stepping stone to the advanced Juniper certifications and demonstrates proficiency in the field of service provider routing and switching.

NEW QUESTION 48
In your RSVP network you have configured three separate LSPs to the same egress address. You have made no other configuration changes to the forwarding decisions made by the router.Which commands can you use to determine which LSP is being used to forward packets?

show route table inet.3

show route table inet.4

show rsvp neighbor

show rsvp session

NEW QUESTION 49
What are three well-known mandatory BGP attributes? (Choose three.)

next hop

origin

community

MED

AS path

https://www.catchpoint.com/bgp-monitoring/bgp-attributes
BGP Attribute Categories
There are four categories of BGP attributes:
Well-known mandatory:Recognized by all BGP peers, passed to all peers, and present in all Update messages. Well-known mandatory attributes include:- Next-hop- Origin- AS PATH Well-known discretionary:Recognized by all routers, passed to all peers, and optionally included in the Update message. Well-known discretionary attributes include:- Local Preference- Atomic Aggregate Optional transitive:Possibly recognized by BGP routers and passed to BGP peers. Optional transitive attributes are marked as partial when not recognized. Optional transitive attributes include:- Aggregator- Community Optional non-transitive:Possibly recognized by BGP routers but not passed to peers. Optional non-transitive attributes include:- Multi-exit discriminator (MED)- Originator ID- Cluster-ID

NEW QUESTION 50
You are asked to configure the OSPF environment to prevent the DR other routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?

set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255

set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0

set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma

set protocols ospf area 0.0.0.0 interface ge–0/0/1 interface-type p2p

NEW QUESTION 51
By default, which two statements are correct about switch ports on a Junos device? (Choose two.)

Trunk ports receive and transmit untagged traffic.

Access ports receive and transmit tagged traffic.

Trunk ports receive and transmit tagged traffic.

Access ports receive and transmit untagged traffic.

On a Junos device, trunk ports are configured to receive and transmit tagged traffic only, while access ports are configured to receive and transmit untagged traffic.
Reference::
Understanding Access and Trunk Interfaces, Juniper Networks Documentation VLANs and Trunking, Juniper Networks Documentation

NEW QUESTION 52
What is required on the egress and ingress devices to transport IPv6 traffic across an IPv4 network?

An IP-IP interface

A TE tunnel interface

A GRE tunnel interface

A 6to 4 tunnel interface

NEW QUESTION 53
Exhibit

The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?

R4 -> R1 -> R2 -> R5 -> R6

R4 -> R5 -> R6

R4 -> R5 -> R2 -> R3 -> R6

R4 -> R1 -> R2 -> R3 -> R6

Considering the bandwidth reservations shown, the only path from R4 to R6 that has sufficient available bandwidth for a new LSP with 400 Mbps reservation is via R1, R2, and R5. This is because the R4-R5 direct link and the R4-R1-R2-R3-R6 path do not have enough unreserved bandwidth to accommodate an additional
400 Mbps LSP.
References:
Juniper Networks documentation on RSVP: RSVP-TE Overview

NEW QUESTION 54
Click the Exhibit button. Two bridge domains are configured as shown in the exhibit.

What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of VLANs 100 and 200?

encapsulation vlan-bridge

encapsulation ethernet-bridge

interface-mode trunk

vlan-id-range [100 200]

NEW QUESTION 55
Which statement is correct about IS-IS?

IS-IS is a distance vector routing protocol.

IS-IS is a path vector routing protocol.

IS-IS is a link-state routing protocol.

IS-IS is a classful routing protocol.

IS-IS is a link-state routing protocol that uses a Shortest Path First (SPF) algorithm to create a topology map of the network. It floods link-state advertisements (LSAs) to all nodes within the network area to ensure each node has a consistent view of the network topology.
References
Juniper Networks Technical Documentation on IS-IS
Understanding IS-IS – Juniper Networks

NEW QUESTION 56
The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.
In this scenario, which two statements are correct? (Choose two.)

The first usable label is 10,001.

The last usable label is 10.501.

The last usable label is 10,499.

The first usable label Is 10,000.

The Segment Routing Global Block (SRGB) defines a range of MPLS labels reserved for segment routing.
With an SRGB starting label of 10,000 and an index range of 500, the first usable label is indeed 10,001 because label 10,000 is typically reserved and not usedfor forwarding. The last usable label would be 10,499 because the range includes 500 labels starting from 10,001.
References:
Juniper Networks documentation on Segment Routing: Segment Routing Overview

NEW QUESTION 57
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers.
Which statement is true about the DIS election in this scenario?

The router with the highest MAC address will be elected as the DIS.

The router with the highest numerical lo0 IP address will be elected as the DIS.

The router with the lowest numerical lo0 IP address will be elected as the DIS.

The router with the lowest MAC address will be elected as the DIS.

NEW QUESTION 58
The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.
In this scenario, which two statements are correct? (Choose two.)

The first usable label is 10,001.

The last usable label is 10.501.

The last usable label is 10,499.

The first usable label Is 10,000.

NEW QUESTION 59
Click the Exhibit.

You are planning the addition of a new EX3400 Series device to the network (EX-3400-7) to service MSTI-1 and MSTI-2.
Referring to the exhibit, which requirement must be met on EX-3400-7 for the MSTP instances to become fully operational and resilient?

The MSTP revision-level must be incremented.

The CIST must be extended to EX-3400-7.

The MSTP configuration-name must be the same.

The bridge-priority must match EX-3400-5 and EX-3400-6.

NEW QUESTION 60
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?

The command is only available if non-stop routing is enabled.

The command is only available on the backup Routing Engine.

The command is only available If a backup router is configured.

The command is only available If graceful restart is enabled.

NEW QUESTION 61
You are asked to create connections between routing instances on the same Junos device and route between the connected Instances. What are two ways to accomplish this task? (Choose two.)

Use physical interfaces.

Use an IRB interface.

Use logical tunnel interfaces.

Use loopback interfaces.

NEW QUESTION 62
Exhibit

Referring to the exhibit, where should next-hop-self-policy be applied to alter the next-hop value?

The policy is applied as an export policy for the group int-64503.

The policy is applied as an export policy for the group ext-64501.

The policy is applied as an import policy for the group int- 64 503.

The policy is applied as an Import policy for the group ext-64501.

The next-hop-self-policy policy is used to alter the next-hop attribute of BGP routes. When you apply it as an export policy to an external BGP (eBGP) group, it changes the next-hop attribute of the routes being advertised to eBGP neighbors so that the next-hop IP address is the IP address of the router itself. This ensures that the eBGP neighbors use the local router as the next hop to reach these routes.
Reference:
Juniper Networks Technical Documentation on BGP Policies

NEW QUESTION 63
Which MPLS feature works with Constrained Shortest Path First (CSPF) to protect against the primary and secondary paths using the same link?

fate-sharing

explicit null configuration

policy control over LSP selection

LSP metrics

Loading …

LATEST JN0-363 Exam Practice Material: https://www.testsimulate.com/JN0-363-study-materials.html

Leave a Reply Cancel reply