100% Pass Your API-936 Exam Dumps at First Attempt with TestSimulate [Q37-Q61]

NEW QUESTION 37
In API RP 936, the referenced ASTM standard procedure for cold crushing strength and modulus of rupture is

NEW QUESTION 38
The most common sizes in thickness for hex mesh are

NEW QUESTION 39
The effective diameter of metal fiber is

NEW QUESTION 40
The welding method utilizing an arc-welding machine in conjunction with a timer and a gun is called

NEW QUESTION 41
A natural or synthetic mineral theoretically consisting solely of alumina (Al2O3), specific gravity 4.00 – 4.02, melting point 3720?F. (2050? C) Hardness 8.8 is called

NEW QUESTION 42
API 936 documentation should content

NEW QUESTION 43
Refractory failure mechanisms are.

NEW QUESTION 44
The vessel downstream of the reactor used to separate different product fractions is called

NEW QUESTION 45
Refractories whose major constituent is lime, magnesia, or both and which may react chemically with acid refractories, acid slags, or acid fluxes at a high temperature is known as

NEW QUESTION 46
1 solid black is the color of the stripe for the alloy material

NEW QUESTION 47
For air-setting phosphate bonded, erosion-resistant refractories mixing, the mixer’s paddles, and bowls shall be

NEW QUESTION 48
Refractories that are resistant to chemical attack by both acid and basic slags, refractories, or fluxes at high temperature is

NEW QUESTION 49
Refractories containing a substantial amount of silica which is reactive with basic refractories, basic slags, or basic fluxes at high temperatures are known as

NEW QUESTION 50
As per API recommended practice 936, the standard test method for reheat change of refractory brick is

NEW QUESTION 51
The exposure of a material or body to a rapid change in temperature which may have a deleterious effect

NEW QUESTION 52
The standard test method for abrasion resistance of refractory materials at room temperature is

NEW QUESTION 53
The property of matter by virtue of which heat energy is transmitted through particles in contact.

NEW QUESTION 54
Brick, tile, fired shapes and fused cast shapes are

NEW QUESTION 55
A combination of refractory grain and suitable bonding agent that, after the addition of a proper liquid, is generally poured into place to form a refractory shape or structure which becomes rigid because of chemical action is called

NEW QUESTION 56
Fused silica aggregate is used as a raw material in a castable providing

NEW QUESTION 57
Applicator qualification for plastic thick layer, the test panel with an applied lining thickness and anchorage shall be

NEW QUESTION 58
Cristobalite is an important constituent of

NEW QUESTION 59
The application of monolithic refractories by means of air placement guns is

NEW QUESTION 60
Fiber concentrations typically range is

NEW QUESTION 61
The vessel in which coke and residual hydrocarbons are burned off the catalyst and the flue gas is then separated from the catalyst is called