H31-341 PDF Dumps 2023 Exam Questions with Practice Test [Q15-Q30]

Q15. If the LED indicator value on the SCC board of the OSN 8800 T32 board is 11, which of the following is the subrack ID?

Q16. Two PIU/APIU boards use the hot backup mode to supply power to the system on the OSN 1800 device, when a PIU/APIU board fails, the system can still work normally.

Q17. The maximum output optical power of an OBU board is 20 dBm, when it is used in a C-band 80-channel system, what is the standard per-channel output optical power?

Q18. In the WDM system, after a certain distance of transmission, the optical signal-to-noise ratio of the receiving signal will be reduced to a certain extent. What is the main reason?

Q19. Which of the following is not a function of RSVP-TE?

Q20. When creating new NE,which of the following Configuration Mode can be selected?

Q21. The 40 Gbit/s and 100 Git/s coherent systems do not require dispersion compensation because the coherent board has a large dispersion tolerance. NG WDM does not support non-coherent networks and coherent networks for hybrid transmission.

Q22. Which of the following are not part of the 400G originating modulation technology?

Q23. The following description of the ASDN software structure, the correct ones are: (Multiple Choice)

Q24. Which of the following description of the evolutionist in the mainstream SDN model in the industry is correct? (Multiple Choice)

Q25. Which of the following is the data that needs to be collected and saved in the event of a failure? (Multiple Choice)

Q26. When configuring the Ethernet Layer 2 attribute, set the Default VLAN ID and VLAN Priority of the untagged frame when the TAG ID is set to Accese or Hybrid. The “VLAN priority” is set according to the QoS of the unified plan.

Q27. The following description of the ASDN software structure, the correct ones are: (Multiple Choice)

Q28. In WDM systems, when using less than () wavelength, it is ideal to use a dielectric thin film filter (TFF).

Q29. The following description of the electrical layer overhead-source function, the correct ones are: (Multiple Choice)

Q30. When using the OSN8800 T32, if you want to set the ID number of the master and slave sub-racks, which board should be set?