Verified 5V0-41.21 &As – Provide 5V0-41.21 with Correct Answers [Q22-Q37]

4/5 - (1 vote)

Verified 5V0-41.21 Exam Dumps Q&As – Provide 5V0-41.21 with Correct Answers

Pass Your 5V0-41.21 Dumps Free Latest VMware Practice Tests

VMware 5V0-41.21 Certification Exam is a globally recognized accreditation that validates a candidate’s skills in implementing and managing security policies in VMware NSX-T Data Center 3.1 environments. VMware NSX-T Data Center 3.1 Security certification is designed to assess the candidate’s knowledge and hands-on experience in deploying and configuring security solutions in virtualized data centers. 5V0-41.21 exam evaluates the ability of the candidates to implement network and security services, such as firewalls, load balancers, VPNs, and other related technologies.

NO.22 What needs to be configured on each transport node prior to using NSX-T Data Center Distributed Firewall time-based rule publishing?

DNS

NTP

PAT

NAT

In order to use NSX-T Data Center Distributed Firewall time-based rule publishing, the NTP (Network Time Protocol) needs to be configured on each transport node. This ensures that the transport nodes have accurate time synchronization, which is required for time-based rule publishing. Additionally, DNS (Domain Name System) and PAT (Port Address Translation) may also need to be configured on each transport node, depending on the desired configuration. Reference: [1] https://docs.vmware.com/en/VMware-NSX-T/2.5/com.vmware.nsxt.admin.doc/GUID-E9F8D8AD-7AF1-4F09-B62C-6A17A6F39A6C.html [2] https://docs.vmware.com/en/VMware-NSX-T/2.4/com.vmware.nsxt.admin.doc/GUID-E9F8D8AD-7AF1-4F09-B62C-6A17A6F39A6C.html

NO.23 When using URL Analysis In NSX-T, which two services must be set in the URL rule to capture traffic over TCP and UDP? (Choose two.)

DNS

DNS-TSIG

DHCPv6

DHCP

DNS-UDP

NO.24 Which two Guest OS drivers are required for the Identity Firewall to operate? (Choose two.)

NSX Network Introspection

vmxnet3

NSX File Introspection

Guest Introspection

e1000e

The two Guest OS drivers that are required for the Identity Firewall to operate are NSX Network Introspection and Guest Introspection. NSX Network Introspection provides network-level visibility and control, while Guest Introspection provides kernel-level visibility and control. The other drivers listed, vmxnet3, NSX File Introspection, and e1000e, are not required for the Identity Firewall to operate.

NO.25 Which two are the insertion points for North-South service insertion? (Choose two.)

Partner Service VM

Uplink of tier-1 gateway

Transport Node NIC

Guest VM vNIC

Uplink of tier-0 gateway

NO.26 Which three arerequired to configure a firewall rule on a getawayto allowtraffic from the internal to web servers? (Choose three.)

Create a URL analysis profile for web hosting category.

Createa firewall rule in System category.

Enable Firewall Service for gateway.

Create a firewall policy in Local Gateway category.

Add a firewall rule in Local Gateway category.

Disable the firewall rule in Default category.

NO.27 Which two are requirements for URL Analysis? (Choose two.)

The ESXi hosts require access to the Internet to download category and reputation definitions.

A layer 7 gateway firewall rule must be configured on the tier-0 gateway uplink to capture DNS traffic.

A layer 7 gateway firewall rule must be configured on the tier-1 gateway uplink to capture DNS traffic,

The NSX Edge nodes require access to the Internet to download category and reputation definitions.

The NSX Manager requires access to the Internet to download category and reputation definitions.

The NSX Edge nodes require access to the Internet to download category and reputation definitions, and a layer 7 gateway firewall rule must be configured on the tier-1 gateway uplink to capture DNS traffic. This will allow the URL Analysis service to analyze incoming DNS traffic and block malicious requests. For more information, please see this VMware Documentation article[1], which explains how to configure URL Analysis on NSX.
[1] https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/nsxt_31_url_analysis/GUID-46BC65F3-7A45-4A9F-B444-E4A1A7E0AC4A.html

NO.28 Refer to the exhibit.

An administrator is reviewing NSX Intelligence information as shown in the exhibit.
What does the red dashed line for the UDP:137 flow represent?

Discovered communication

Allowed communication

Blocked communication

Unprotected communication

NO.29 An administrator wants to configure NSX-T Security Groups inside a distributed firewall rule. Which menu item would the administrator select to configure the Security Groups?

System

Inventory

Security

Networking

NO.30 A security administrator has configured NSX Intelligence for discovery. They would like to get recommendations based on the changes in the scope of the input entities every hour.
What needs to be configured to achieve the requirement?

Start a new recommendation.

Publish the recommendations.

Toggle the monitoring option on.

Adjust the time range to 1 hour.

NO.31 An administrator needs to configure their NSX-T logging to audit changes on firewall security policy. The administrator Is using the following command from NSX-T3.1 documentation :

Which Message ID from the following list will allow the administrator to track changes on firewall security rules?

FABRIC

MONITOR

SYSTEM

FIREWALL

The message ID that will allow the administrator to track changes on firewall security rules is “FIREWALL”. This message ID is part of the NSX-T3.1 documentation and will be used to log any changes made to the firewall security policy. This will allow the administrator to easily audit and track any changes made to the policy. Reference: [1] https://docs.vmware.com/en/VMware-NSX-T/3.1/nsx_31_logging_guide/GUID-ADEDE32F-0606-4C2F-81B2-71914EEDA11F.html [2] https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/nsx/vmware-nsx-data-center-logging-guide.pdf

NO.32 Refer to the exhibit.

Referencing the exhibit, what is the VMware recommended number of NSX Manager Nodes to additionally deploy to form an NSX-T Manager Cluster?

NO.33 What component in a transport node receives the firewall configuration from the central control plane?

nsx-ccp

nsx-appl-proxy

nsx-mpa

nsx-proxy

NO.34 Which two statements are true about NSX Intelligence? (Choose two.)

NSX Intelligence assists to build service insertion with Partner SVM.

NSX Intelligence supports planning of distributed firewall rules and policy.

NSX Intelligence can help to visualize network physical infrastructure.

NSX Intelligence can be used in conjunction with vRealize Network Insight.

NSX Intelligence supports planning of NSX-T Edge Firewall rules and policy.

The two statements that are true about NSX Intelligence are that it assists to build service insertion with Partner SVM and that it supports planning of NSX-T Edge Firewall rules and policy. NSX Intelligence can be used in conjunction with vRealize Network Insight to provide visibility and insights into the network, but it cannot be used to visualize the physical infrastructure. Additionally, while it can help to plan firewall rules and policy, it does not support planning of distributed firewall rules and policy.

NO.35 To which object can time based rules be applied?

Gateway Firewall only

DFW and Gateway Firewall both

DFW only

DFW or Gateway Firewall, but not both at the same time

For further reading, see the VMware NSX-T Data Center Administration Guide (https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-8F9C6E9E-9C83-4CAD-BB3A-F4E4A25C6FE7.html) for more information on configuring time based rules.

NO.36 How does N5X Distributed IDS/IPS keep up to date with signatures?

NSX Edge uses manually uploaded signatures by the security administrator.

NSX-T Data Center is using a cloud based database to download the IDS/IPS signatures.

NSX Manager has a local IDS/IPS signatures database that does not need to be updated.

NSX Distributed IDS/IPS signatures are retrieved from updates.vmware.com.

NO.37 Which two statements are true about IDS/IPS signatures? (Choose two.)

Users can upload their own IDS signature definitions from the NSX UI.

IDS Signatures can be High Risk, Suspicious, Low Risk and Trustworthy.

Users can create their own IDS signature definitions from the NSX UI.

An IDS signature contains data used to identify known exploits and vulnerabilities.

An IDS signature contains a set of instructions that determine which traffic is analyzed.

Loading …

Get Top-Rated VMware 5V0-41.21 Exam Dumps Now: https://www.testsimulate.com/5V0-41.21-study-materials.html

Leave a Reply Cancel reply