[Jun 24, 2024] Prepare For The MS-203 Question Papers In Advance [Q180-Q199]

5/5 - (1 vote)

[Jun 24, 2024] Prepare For The MS-203 Question Papers In Advance

MS-203 PDF Dumps Real 2024 Recently Updated Questions

The Microsoft MS-203 exam is targeted at messaging administrators who have experience with messaging infrastructure, including Exchange Server, Exchange Online, and related technologies. Candidates who have practical experience in managing messaging environments and are looking to enhance their knowledge and skills in this area can benefit from this certification.

Securing the Messaging Environment

This domain is focused on the management of role-based permissions, ensuring message hygiene using office 365 advanced threat and exchange online, and compliance. To get ready for the questions under this section, one should gain enough knowledge about the following: the administration of role groups and user roles, planning of RBAC roles, connection filters, performing monitoring of the quarantined items, and ensuring protection for phishing. Along with this, candidates should be skilled in configuring ATP safe links, safe attachments, audit logs, etc.

NO.180 You have a hybrid deployment between a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 organization.
The tenant uses an email domain named @contoso.com.
You recently purchased an email domain named fabrikam.com.
You need to ensure that all the users in the tenant can receive email messages by using the @fabrikam.com email domain. The solution must ensure that the users can continue to receive email by using the
@contoso.com email domain.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE; Each correct selection is worth one point.

From Azure AD Connect add a domain for fabrikam.com.

From the on-premises Exchange admin center, add an accepted domain for fabrikam.com.

From the Exchange Management Shell, create a script that runs the

From the Microsoft 365 admin center, verify the fabrikam.com email domain

From the on-premises Exchange admin center, modify the email address policy

From the Microsoft 365 admin center, add the fabrikam.com email domain.

NO.181 You create a transport rule as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

NO.182 Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to reduce the likelihood that malicious links contained in emails received by mailboxes in @lab.CloudCredential(1).TenantName are opened.
To complete this task, sign in to the Exchange admin center.

See explanation below
Explanation:
Navigate to the Exchange Admin Center, and then choose the Advanced Threats section of the EAC.
Click the Safe Links tab to examine all existing Safe Links policies:
After navigating to the Safe Links policy page, choose the Add button (+) to create a new policy. The New Safe Links Policy window opens.
– In the resulting window we’ll be presented with the options available for creating our new Safe Links policy.
In Name enter an appropriate, unique, name that describes this policy. In the description enter some text that provides a little more detail for anyone trying to make sense of the options selected here.
Next we’ll choose the action to take for URLs. We can leave this Off, if for example we are creating a policy to exclude a group of users that would otherwise be affected by another Safe Links policy.
The checkbox Do not track user click can be selected if you do not wish to use the reporting functionality available at a later date. This is a key feature when understanding which users clicked a link that was later found to be a threat, so be careful about choosing to disable user click tracking.
Our final check box provides options for click-through is a link is found to be dangerous. In some circumstances you may trust users to click-through links, or they may request the ability to do so. In most circumstances you will not want a user to click-through the malicious link.
Some URLs, such as those for internal addresses or even trusted partners, may not require re-writing. Enter these URLs here.
Finally, we will select the scope for the rule under the Applied to section.
Using similar conditions to transport rules we can select who this rule applies to including:
– Individual recipients
– Recipient domains
– Members of distribution groups
The same conditions can be used for exceptions. When you have configured your rule, choose Save.
After saving the new Safe Links rule it will be shown in the EAC list. Just like Transport Rules, you can use the Enabled column to enable or disable the Safe Links policy.
Reference:
https://techgenix.com/implementing-exchange-online-advanced-threat-protection-part2/

NO.183 You have an address book policy named Contoso-US that contains an address list named Contoso-Finance.
You need to add an address list named Contoso-Marketing to Contoso-US without removing Contoso-Finance.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.184 You need to recommend an Office 365 solution that meets the technical requirements for email from adatum.com.
Which two components should you recommend configuring from the Exchange admin center in Exchange Online? Each correct presents a complete solution.
NOTE: Each correct selection is worth one point.

DKIM signatures

a spam filter

a malware filter

data loss prevention (DLP) policies

a connection filter

NO.185 You have a Microsoft Exchange Server 2019 organization and a Microsoft 365 E5 subscription.
From the Microsoft 365 admin center, you open Data migration as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

NO.186 You have a Microsoft Exchange Online tenant that has Office 365 Advanced Threat Protection (ATP) enabled.
The tenant contains a user named Ben Smith who has a UPN of [email protected]. Ben Smith is protected by using an ATP anti-phishing policy.
Ben Smith reports that emails sent from his personal account of [email protected] are not delivered to his work email account.
You need to ensure that personal emails are delivered to the [email protected] What should you do?

Create a transport rule to assign the MS-Exchange-Organization-PhishThresholdLevel header a value of 2 for the message received from [email protected]

Add [email protected] as a trusted sender to the ATP anti-phishing policy.

Add [email protected] as a trusted sender to the ATP anti phishing.

Add relecloud.com to the ATP anti-phishing list of misted domains.

NO.187 Your company has a Microsoft Exchange Online subscription for an email domain named contoso.com.
The company works with a partner company that uses an email domain named tailspintoys.com.
You need to configure the environment only to accept email from tailspintoys.com if the email is sent from an IP address of 131.107.12.85.
How should you configure the connector from the Exchange admin center? To answer, drag the appropriate options to the correct message settings. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

NO.188 You have a Microsoft Exchange Server 2019 hybrid deployment.
All Mailbox servers and domain controllers are in the same site.
You deploy an Edge Transport server.
You need to ensure that all SMTP traffic between the on-premises organization and Exchange Online is routed through the Edge Transport server.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

NO.189 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft Exchange Server 2019 hybrid deployment. All user mailboxes are hosted in Microsoft
365. All outbound SMTP email is routed through the on-premises Exchange organization.
A corporate security policy requires that you must prevent credit card numbers from being sent to internet recipients by using email.
You need to configure the deployment to meet the security policy requirement.
Solution: From the Exchange organization, you modify the properties of the Send connectors.
Does this meet the goal?

Yes

NO.190 You need to resolve the email delivery delay issue.
What should you do?

From the Security & Compliance admin center, modify the safe attachments policy

From the Security & Compliance admin center, create a supervision policy.

From the Exchange admin center in Exchange Online, modify the antimalware policy.

From the Exchange admin center in Exchange Online, modify the spam filter policy.

NO.191 You have a Microsoft Exchange Online tenant.
You need to add a custom domain named contoso.com that meets the following requirements:
All email messages from the intemet must first be filtered by a third-party cloud service before being delivered to Exchange Online.
Recipient email systems must validate the messaging server for contoso.com) Which type of DNS record should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.192 You have hybrid deployment between a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 organization. The deployment uses Azure AD Connect. All incoming email is delivered to Exchange Online. You have 10 mail-enabled public folders hosted on an on-premises Mailbox server.
Customers receive an error when an email message is sent to a public folder.
You need to ensure that all the mail-enabled public folders can receive email messages from the internet. The solution must ensure that messages can be delivered only to valid recipients.
Solution: From Azure AD Connect, select Exchange Mail Public Folders.
Does this meet the goal?

Yes

NO.193 Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to create a public folder named Finance. The solution must ensure that only the members of a group named Finance Team can send email messages to the Finance folder.
To complete this task, sign in to the Microsoft 365 admin center.

In the EAC, go to Public folders > Public folder mailboxes, and then click Add +.
In the New public folder mailbox page that opens, enter the following information:
– Name: Enter the name for the public folder mailbox.
– Organizational unit: Click Browse to select the location in Active Directory where the mailbox object is created.
– Mailbox database: Click Browse to select the mailbox database where the mailbox is created.
When you’re finished, click Save.
Use the EAC to create a public folder
When using the EAC to create a public folder, you’ll only be able to set the name and the path of the public folder. To configure additional settings, you’ll need to edit the public folder after it’s created.
Navigate to Public folders > Public folders.
If you want to create this public folder as a child of an existing public folder, click the existing public folder in the list view. If you want to create a top-level public folder, skip this step.
Click Add +.
In Public Folder, type the name of the public folder.
In the Path box, verify the path to the public folder. If this isn’t the desired path, click Cancel and follow Step 2 of this procedure.
Click Save.
Navigate back to Public folders > Public folders.
In the list view, select the public folder that you want to mail-enable or mail-disable.
In the details pane, under Mail settings, click Enable or Disable.
A warning box displays asking if you’re sure you want to enable or disable email for the public folder. Click Yes to continue.
You can then run the Set-MailPublicFolder PowerShell cmdlet, and include the AcceptMessagesOnlyFromDLMembers parameter to specify who is allowed to send messages to this recipient.
Reference:
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/create-public-folder-mailboxes?view=exchserver-2019
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/create-public-folders?view=exchserver-2019
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/mail-enable-or-disable?view=exchserver-2019
https://docs.microsoft.com/en-us/powershell/module/exchange/set-mailpublicfolder?view=exchange-ps

NO.194 You need to configure the environment to support the planned changes for email addresses.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.195 You have a hybrid deployment that contains a Microsoft exchange Online tenant and anon premises Exchange Server 2019 server named Server1. Alt users use an email address suffix of @contoso.com.
On Server1, you create a new mailbox that uses an email address of [email protected] Users hosted in Exchange Online report that they receive a non-delivery report (NDR) When they attempt to send email messages to [email protected]. The NDR contains the following text: “User1 wasn’t found at contoso.com.” You verify that the Exchange Online users can send email successfully to the other mailboxes hosted on Server1. Users hosted on Server1 can send email to [email protected] successfully.
You need to identify what causes the email delivery to fail. What should you use?

the Azure Active Directory admin center

the Exchange admin center

Azure AD Connect Health

the on-premises Exchange admin center

NO.196 Your company has an Exchange Online tenant.
A partner company named Fourth Coffee also uses Exchange Online.
You need to ensure that the users at your company share free busy information with the users at Fourth Coffee. The solution must ensure that the meeting details included in the calendars of your company users remain hidden from the Fourth Coffee users.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NO.197 You have 1,000 user accounts that are each licensed for Microsoft 365. Each user account has a Microsoft Exchange Online mailbox.
Ten of the user accounts are configured as service accounts for applications. The applications send event notifications to the mailboxes of the service accounts by using SMTP. The developers of each application have delegated access to the mailbox of their respective application.
You need to ensure that all the event notifications sent by the applications are retained in the service account mailboxes so that new developers can review older notifications. The developers must be able to view only the notifications for their respective application.
What should you do?

Replace the service account mailboxes with a single user mailbox that contains a folder for each application.

Replace the service account mailboxes with a single user mailbox that contains Power Automate rules.

Convert the service account mailboxes into shared mailboxes.

Convert the service account mailboxes into mail-enabled users.

NO.198 You have a Microsoft Exchange Online tenant that contains three users named User1, User2, and User3.
Mobile device mailbox policies are configured as shown in the following exhibit.

The users are configured as shown in the following table.

You create a new mobile device mailbox policy as shown in the following exhibit.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NO.199 You need to implement a solution to meet the technical requirements for the SCL.
How should you complete the command? To answer, select the appropriate options in the answer area.

MS-203 Dumps and Practice Test (396 Exam Questions): https://www.testsimulate.com/MS-203-study-materials.html

Securing the Messaging Environment

Leave a Reply Cancel reply