Valid Test Simulate materials for certificate qualification
 
[Q11-Q34] Pass Your CWNP CWSP CWSP-207 Exam Easily with Accurate PDF Questions [Jul 13, 2024]

[Q11-Q34] Pass Your CWNP CWSP CWSP-207 Exam Easily with Accurate PDF Questions [Jul 13, 2024]

4/5 - (3 votes)

Pass Your CWNP CWSP CWSP-207 Exam Easily with Accurate PDF Questions [Jul 13, 2024]

CWSP-207 Certification Exam Dumps Questions in here

Q11. What EAP type supports using MS-CHAPv2, EAP-GTC or EAP-TLS for wireless client authentication?

 
 
 
 
 

Q12. When using a tunneled EAP type, such as PEAP, what component is protected inside the TLS tunnel so that it is not sent in clear text across the wireless medium?

 
 
 
 

Q13. Given: The ABC Corporation currently utilizes an enterprise Public Key Infrastructure (PKI) to allow employees to securely access network resources with smart cards. The new wireless network will use WPA2-Enterprise as its primary authentication solution. You have been asked to recommend a Wi-Fi Alliance-tested EAP method.
What solutions will require the least change in how users are currently authenticated and still integrate with their existing PKI?

 
 
 
 
 
 

Q14. In order to acquire credentials of a valid user on a public hot-spot network, what attacks may be conducted?
Choose the single completely correct answer.

 
 
 
 
 

Q15. What preventative measures are performed by a WIPS against intrusions?

 
 
 
 
 

Q16. Given: In a security penetration exercise, a WLAN consultant obtains the WEP key of XYZ Corporation’s wireless network. Demonstrating the vulnerabilities of using WEP, the consultant uses a laptop running a software AP in an attempt to hijack the authorized user’s connections. XYZ’s legacy network is using 802.11n APs with 802.11b, 11g, and 11n client devices.
With this setup, how can the consultant cause all of the authorized clients to establish Layer 2 connectivity with the software access point?

 
 
 
 

Q17. What WLAN client device behavior is exploited by an attacker during a hijacking attack?

 
 
 
 
 

Q18. Select the answer option that arranges the numbered events in the correct time sequence (first to last) for a client associating to a BSS using EAP-PEAPv0/MSCHAPv2.
1. Installation of PTK
2. Initiation of 4-way handshake
3. Open system authentication
4. 802.11 association
5. 802.1X controlled port is opened for data traffic
6. Client validates server certificate
7. AS validates client credentials

 
 
 
 
 
 

Q19. The following numbered items show some of the contents of each of the four frames exchanged during the
4-way handshake:
1. Encrypted GTK sent
2. Confirmation of temporal key installation
3. Anonce sent from authenticator to supplicant
4. Snonce sent from supplicant to authenticator, MIC included
Arrange the frames in the correct sequence beginning with the start of the 4-way handshake.

 
 
 
 

Q20. Given: You are the WLAN administrator in your organization and you are required to monitor the network and ensure all active WLANs are providing RSNs. You have a laptop protocol analyzer configured.
In what frame could you see the existence or non-existence of proper RSN configuration parameters for each BSS through the RSN IE?

 
 
 
 
 

Q21. Given: ABC Hospital wishes to create a strong security policy as a first step in securing their 802.11 WLAN.
Before creating the WLAN security policy, what should you ensure you possess?

 
 
 
 

Q22. What is a primary criteria for a network to qualify as a Robust Security Network (RSN)?

 
 
 
 
 

Q23. Given: Your network includes a controller-based WLAN architecture with centralized data forwarding. The AP builds an encrypted tunnel to the WLAN controller. The WLAN controller is uplinked to the network via a trunked 1 Gbps Ethernet port supporting all necessary VLANs for management, control, and client traffic.
What processes can be used to force an authenticated WLAN client’s data traffic into a specific VLAN as it exits the WLAN controller interface onto the wired uplink? (Choose 3)

 
 
 
 

Q24. Given: In XYZ’s small business, two autonomous 802.11ac APs and 12 client devices are in use with WPA2-Personal.
What statement about the WLAN security of this company is true?

 
 
 
 
 

Q25. Wireless Intrusion Prevention Systems (WIPS) are used for what purposes? (Choose 3)

 
 
 
 
 
 

Q26. As a part of a large organization’s security policy, how should a wireless security professional address the problem of rogue access points?

 
 
 
 
 

Q27. ABC Company requires the ability to identify and quickly locate rogue devices. ABC has chosen an overlay WIPS solution with sensors that use dipole antennas to perform this task. Use your knowledge of location tracking techniques to answer the question.
In what ways can this 802.11-based WIPS platform determine the location of rogue laptops or APs? (Choose
3)

 
 
 
 
 

Q28. Your organization required compliance reporting and forensics features in relation to the 802.11ac WLAN they have recently installed. These features are not built into the management system provided by the WLAN vendor. The existing WLAN is managed through a centralized management console provided by the AP vendor with distributed APs and multiple WLAN controllers configured through this console.
What kind of system should be installed to provide the required compliance reporting and forensics features?

 
 
 
 

Q29. In an effort to optimize WLAN performance, ABC Company has upgraded their WLAN infrastructure from
802.11a/g to 802.11n. 802.11a/g clients are still supported and are used throughout ABC’s facility. ABC has always been highly security conscious, but due to budget limitations, they have not yet updated their overlay WIPS solution to 802.11n or 802.11ac.
Given ABC’s deployment strategy, what security risks would not be detected by the 802.11a/g WIPS?

 
 
 
 

Q30. Given: You view a protocol analyzer capture decode with the following protocol frames listed in the following order (excluding the ACK frames):
1) 802.11 Probe Request and 802.11 Probe Response
2) 802.11 Auth and another 802.11 Auth
2) 802.11 Assoc Req and 802.11 Assoc Rsp
4) EAPOL-Start
5) EAP Request and EAP Response
6) EAP Request and EAP Response
7) EAP Request and EAP Response
8) EAP Request and EAP Response
9) EAP Request and EAP Response
10) EAP Success
19) EAPOL-Key (4 frames in a row)
What are you seeing in the capture file? (Choose 4)

 
 
 
 
 
 
 

Q31. You perform a protocol capture using Wireshark and a compatible 802.11 adapter in Linux. When viewing the capture, you see an auth req frame and an auth rsp frame. Then you see an assoc req frame and an assoc rsp frame. Shortly after, you see DHCP communications and then ISAKMP protocol packets. What security solution is represented?

 
 
 
 
 

Q32. You are using a utility that takes input and generates random output. For example, you can provide the input of a known word as a secret word and then also provide another known word as salt input. When you process the input it generates a secret code which is a combination of letters and numbers with case sensitivity. For what is the described utility used? (Choose 3)

 
 
 
 
 

Q33. You work as the security administrator for your organization. In relation to the WLAN, you are viewing a dashboard that shows security threat, policy compliance and rogue threat charts. What type of system is in view?

 
 
 
 
 

Q34. What drawbacks initially prevented the widespread acceptance and use of Opportunistic Key Caching (OKC)?

 
 
 
 

Updated CWSP-207 Exam Practice Test Questions: https://www.testsimulate.com/CWSP-207-study-materials.html

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw myportal.utt.edu.tt www.stes.tyc.edu.tw www.stes.tyc.edu.tw

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below