[2024] Use Real Cisco Dumps – 100% Free 300-510 Exam Dumps [Q12-Q31]

4.3/5 - (3 votes)

[2024] Use Real Cisco Dumps – 100% Free 300-510 Exam Dumps

Realistic 300-510 Dumps Latest Cisco Practice Tests Dumps

Achieving the Cisco CCNP Service Provider certification demonstrates a high level of expertise and competency in designing, implementing, and supporting service provider networks. Implementing Cisco Service Provider Advanced Routing Solutions certification is highly valued in the industry and can lead to increased job opportunities and higher salaries.

Cisco 300-510 exam is a 90-minute exam consisting of 60-70 questions. 300-510 exam is available in English and Japanese and can be taken online or at a Pearson VUE testing center. 300-510 exam fee is $300 USD, and candidates are required to renew their certification every three years by passing a recertification exam or earning Continuing Education credits.

Q12. An engineer with an employee ID: 4535:15:507 must implement PIM-SSM in the network to support a new multicast messaging service. All the routers in the network run a distance vector routing protocol. Unicast routing is established on the network and is working normally. What must the engineer enable to continue the implementation process?

IGMPv3 on all interfaces that participate in multicast

PIM RP feature on the network

PIM dense mode on all devices on the network

PIM dense mode and IGMPv2 on all interfaces that participate in multicast

Q13. Refer to the exhibit.

Refer to the exhibit. This network is deployed with all connected links configured to run IS-IS. The routing protocol is enacted globally on each router, and the network engineer expects full routing Information to be shared among all routers. R5 is receiving routes from R4 but is missing routes from R1. Which action corrects the issue so that all routes are shared among the routers?

Configure all routers to reside in toe area.

Configure RI and RS as Level 1″Level 2

Configure R3 as a Level 2 we.

Configure R5 in the same as RI,

Q14. Refer to the exhibit. An engineer at a large ISP is troubleshooting suboptimal routing on a customer’s IS-IS network with multiple Level 1-2 routers. The network consists of numerous routers that are configured for MPLS. When IS-IS picks the closest Level 1-2 router to exit the area, suboptimal routing occurs in Area 8 and Area 10. The other IGP protocols are running correctly, and the IS-IS adjacency between routers is established. Which action resolves the issue?

Redistribute Level 2 prefixes into Level 1 on router 2.

Disable advertisement of the default route on router 2.

Configure each interface as either Level 1 or Level 2 circuit type on router 1.

Configure the router as DIS for each of the interfaces on router 1.

Q15. Refer to the exhibit.

R2

Q16. Refer to the exhibit.

Refer to the exhibit. MPLS traffic from 192.168.4.0/24 to 192.168.5.0/24 is failing to pass over the link from R4 to R2. The engineer verified that:
Cisco Express Forwarding Is enabled on all routers.
All routers reach all networks via OSPF.
MPLS traffic from 192.168.1.0/24 to 192.168.3.0/24 is passing normally over the link from R1 to R2.
Which action resolves the issue?

On router R4, remove the mpls ip command on the s/O/O/2 interface.

On router R2, configure the mpls ip command on the SIO/O/4 interface.

On router R4, configure the mpls label protocol Idp command on all serial interfaces.

On router R2, configure the mpls label protocol Idp command on the interface.

Q17. For which reason can two devices fail to establish an OSPF neighbor relationship?

The two devices have different process IDs

The two devices have different network types

The two devices have different router IDs

The two devices have the same area ID

Q18. Refer to the exhibit. A network engineer is investigating a report of packet drops between the branch site and the central site.
– The two sites are connected via OSPF and RSVP-TE tunnels.
– Traffic from the central site to the branch site is passing normally.
– Technicians at both sites successfully ping the loopback IP addresses on routers R1 and R2.
Which configuration corrects the packet-drop problem?

R2(Config)# interface Tunnel333
R2(Config-if)# tunnel mpls traffic-eng bandwidth 33000

R1(Config)# interface Tunnel222
R1(Config-if)# tunnel mpls traffic-eng bandwidth 33000

R1(Config)# interface Ge0/0
R1(Config-if)# ip rsvp bandwidth 33000 3300

R2(Config)# interface Ge0/0
R2(Config-if)# ip rsvp bandwidth 33000 3300

Q19. Which difference should be considered when intradomain or interdomain multicast routing is implemented?

Interdomain multicast routing requires an IS-IS or OSPF neighbor relationship between the domains but intradomain multicast routing requires only BGP Questions & Answers PDF P-57

Interdomain multicast routing relies on PIM-DM and intradomain multicast routing relies on PIM- SM.

interdomain multicast routing uses BIDR-PIM to establish neighbor relationships between AS and interdomain multicast routing uses MSDP

A network uses intradomain multicast routing without interdomain routing but networks that use interdomain multicast routing must also apply intradomain routing

Q20. Refer to the exhibit.

Refer to the exhibit. Unified MPLS is implemented on this network to provide end-to-end services A network engineer noticed that R3 is failing to receive labels from R1 However, R2 is receiving labels from R1 R3 can ping R1 normally Which action resolves the issue?

Add the cdp run command to the link configuration between R1 and R3.

Add the send-label keyword in the R1 neighbor statement for R3.

Configure R1 to run Unified MPLS on both interfaces.

Disable mpls Ip on the link between R1 and R3

Q21. Refer to the exhibit.

Refer to the exhibit Networks 172.16.31.0/24 and 172 16 30.0/24 are advertised in area 34. and network 172.22 10.0/24 is advertised in area 0. A recent security review discovered that users connected to routers R1 and R2 have been making unauthorized access to an application running on network 172 16 31 0/24 An engineer determined that routers R1 and R2 are receiving updates for network 17 16 31 0/24 Which action resolves the issue?

Apply route filtering on routers R3 and R4.

Apply route filtering on router R3 only.

Apply route filtering on routers RI and R2

Apply route filtering on router R4 only.

Q22. Refer to the exhibit.

Routers R1 and R2 reside in AS 65530, which is multihomed to the Internet. A network engineer expects devices in the AS to use R2 to access the Internet, but they are using R1 as the exit point from the AS. Which action corrects the problem?

Add a sequence number to the route map to remove the implicit deny.

Change the route map direction in the neighbor statement to out

Configure the route map with a local preference of 200 or higher.

Remove the neighbor statements from the address family configuration and activate the neighbor globally on R1.

Q23. Refer to the exhibit.

Routers R1, R2. R3, and R4 have been configured to run OSPF. and router R5 is running EIGRP Traffic from R1 to R5 is expected to pass via R4. but OSPF routing has calculated the best path via R3. Which action corrects the problem?

Configure R3 to use metric-type 1 with a higher metric than R4.

Configure R1 with a static route to the R5 networks and set R5 as the next hop.

Reconfigure R1 in Area 0.

Change the metric-type value on R3 to 2.

Q24. Refer to the exhibit.

A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.
Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?

Option A

Option B

Option C

Option D

Q25. Refer to the exhibit.

Refer to the exhibit. Network connectivity between bank A and bank B has been lost Users at bank A and bank B are able to successfully reach their directly connected PE routers. All routers in OSPF area 0 are correctly advertising and learning routing updates. Which action resolves the issue?

Enable next-hop-self under the iBGP peering configuration on routers PEI and PE2

Configure the P routers to redtstnbute BGP routes within OSPF area 0.

Configure router PI to advertise the IP prefix of PEI.

Configure MPLS with an end-to-end label-switched path on each router.

Q26. Refer to the exhibit. Which task must you perform on interface g1/0/0 to complete the SSM implementation?

configure OSPFv3

enable CDP

disable IGMP

configure IGMPv3

Q27. Refer to the exhibit. After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships.
Which statement about the configuration is true?

Router 2 receives a Type 5 LSAs from router 1 for its connected subnets

Router 2 uses router 3 as the next hop for 192.168.0.0/24

Router 2 uses router 1 as the next hop for 192.168.0.0/24

Router 2 receives a Type 7 LSAs from router 3 for its connected subnets

Q28. A network engineer recently deployed a wireless network for users at a new office to join video conferences wirelessly The existing network consists of routers that are configured for EIGRP and BGP. which are located at several data centers in different physical locations The engineer configured PIM-SSM within a single domain from a single source However, during the testing phase, the video conference failed to work for any of the users. The IPs are reachable and firewalls in the network are configured correctly to allow the traffic. Which action resolves the issue?

Configure PIM dense mode to replace P1M-SSM.

Configure PIM dense mode with multidomain multicast

Configure the devices to send join messages toward a multicast SPT

Configure PIM sparse mode to replace PIM-SSM.

Q29. Refer to the exhibit.

R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?

The BGP session does not come up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R3, but not between R1 and R2.

The BGP session comes up between R1 and R2, but not between R1 and R3.

Q30. Refer to the exhibit. What is the relationship between Router 1 and Router 2?

Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information.

Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers.

Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers.

Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1.

Q31. Refer to the exhibit.

What is the relationship between Router 1 and Router 2?

Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information.

Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers.

Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers.

Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1.

Introduction to Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam

It is a 90-minute test affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) exam tests the candidate’s knowledge of integrating VPN services, including Layer 2, Layer 3, and IPv6, from the service provider. Different types of 310-510 SPRI practice test helps the students to prepare for the exam.

300-510 Dumps PDF – 300-510 Real Exam Questions Answers: https://www.testsimulate.com/300-510-study-materials.html

Introduction to Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam

Leave a Reply Cancel reply