H31-341 PDF Dumps Nov 04, 2022 Exam Questions – Valid H31-341 Dumps [Q124-Q147]

Rate this post

H31-341 PDF Dumps Nov 04, 2022 Exam Questions – Valid H31-341 Dumps

Ultimate H31-341 Guide to Prepare Free Latest Huawei Practice Tests Dumps

Get to know about the Best Solution for the preparation of Huawei H31-341 Exam

We provide the best Huawei H31-341 certification exam questions that can be prepared in a short period of time. Hence, we give you an opportunity to understand Huawei HiLTE in a short period of time. Our experts give you the best solution for the preparation for the Huawei HiLTE certification exam. They explain all topics in detail to you. It is easy to prepare for this exam if you take up our Huawei HiLTE practice questions. The explanations given by our experts are also very good. H31-341 Dumps will help you to understand the different types of questions that may come up in the actual Huawei HiLTE exam. You may try some free demo questions of the Huawei H31-341 exam to understand different types of questions that may come up in the actual Huawei HiLTE exam. You can also buy Huawei HiLTE exam products if you need to take this exam.

We give you an opportunity to take the sample exam tests. These sample exam questions are very good. You can get to know different types of questions that may come up in the actual Huawei HiLTE exam. If you need any clarification related to H31-341 PDF practice test, all you need to do is contact us. We are available 24/7 at your service. You can check out our customer support portal for more information related to Huawei HiLTE. You can also take up the free demo of Huawei HiLTE to understand the format of the actual exam.

Q124. MPLS APS is a network protection mechanism. It implements service switching by using the MPLS OAM detection function.

True

False

Q125. Which of the following description of the extended ECC is correct? (Multiple Choice)

Extended ECC recommends to use manual basis, which reduces mutual negotiation between network elements.

The scale of the extended ECC network (the sum of the server and the client) must not exceed 8.

Extended ECC is divided into automatic extended ECC and manual extended ECC. One network element can only support one mode at the same time. These two methods cannot be directly docked.

In the automatic extended ECC mode, you need to connect the Ethernet ports of the two NEs with a direct-connected network cable (or a standard network cable through B), extend the ECC, and specify the server and client.

Q126. The OTN circuit board (such as ND2) of OSN 1800V can respond to the status of the indicator light on the panel to reflect the optical power of the local end too high or too low.

TRUE

FALSE

Q127. When many alarms are reported at the same time, the alarm handling priority is as follows: Handle alarms according to the priorities of equipment alarms (such as BUS_ERR, HARD_ERR, and COMM_FAIL), optical-layer LOS, electrical-layer OTUk_LOF, ODUk_SSF, and protection switching.

True

False

Q128. The following basic principles for fault location in WDM systems are (). (Multiple Choice)

First two-way, then one-way first

First advanced, then low level

First single wave, followed by multiple waves

First locate external and then location transmission

Q129. Which of the following scenarios does the meter test apply to? (Multiple choice)

Exclude external issues with the transport device

Equipment docking problem

Locate the faulty board

Equipment performance indicator problem

Q130. Which of the following description of the DM12 board are correct? (Multiple choice)

One DX1 board can be used with two DM12

Access the NX6bit/s and sub-rate service signals through the DB28 connector on the DM12 board.

Electrical signal input and output interfaces for DDN, Unframed E1 and sub-rate services

Accessing G.703 64 kbit/s co-directional service signals through the DB44 interface on the DM12 board

Q131. The OTS path refers to the physical fiber connection between two adjacent OM/OD/OA on the main optical path.

TRUE

FALSE

Q132. Which of the following ROADM boards have WSS optical modules? (Multiple Choice)

WSMD9

WSD9

WSM9

RDU9

Q133. Which of the following service layer paths is required when creating OCh using the path method?

ODUk

OMS

OTS

Client

Q134. For the wavelength division system, configure the 1st-20th wave, use the NS4 single board, and test the M40 output port with the spectrum analyzer during the commissioning. It is found that the optical power of the 20th wave is significantly lower than the other 19 waves. The possible reasons are as follows: (Multiple Choice)

The 20th channel corresponding to the M40V has a large insertion loss.

The 20th wave OTU’s RX port is incorrectly added with 5dB fixed light decay.

The 20th wave OTU wave side light is too small

The 20th wave OTU center is long drifted

Q135. The basic principles of STP device fault location are? (Multiple choice)

First advanced, then low level

First low speed, then high speed

First external, then transfer

First network, then network element

Q136. Which of the following is the incorrect description of the internal port properties of the Ethernet board?

For the ingress port for the Access attribute, if the input data carries the VLAN ID, discard.

For the inbound port of the Tag Aware attribute, if the input data carries the VLAN ID, transparently receive the data.

For the ingress port of the Access attribute, if the input data does not carry the VLAN ID, it is directly transparent.

For the ingress port of the Tag Aware attribute, if the input data does not carry the VLAN ID, discard.

Q137. The following description of the ASDN software structure, the correct ones are: (Multiple Choice)

Intelligent optical network consists of three planes

The management plane mainly refers to upper management such as network management.

Intelligent software main application management plane

The transmission plane refers to the traditional transmission network.

Q138. Path method creates OCh failure, what are the possible reasons? (Multiple Choice)

There are still unremoved alarms in the boards involved in OCh.

Inconsistent wavelength setting at both ends of source and sink

No service layer path

Some pigtails are not connected

Q139. The protocols used in ASON are RSVP-TE, CSPF-TE, and LMP.

True

False

Q140. Which of the following are the business board types of MSTP equipment? (Multiple choices)

Interface board

Service processing board

Service processing board with interface

Auxiliary board

Q141. FOADM includes parallel FOAD and serial FOADM, both supporting 40 waves or 80 waves of arbitrary wavelengths.

TRUE

FALSE

Q142. A, C are the WDM OTM stations, and B is the relay station. When the transmission direction of the A to B stations is interrupted, the Wavelength side of the B-stack OTU relay board reports the R_LOS emergency alarm and runs the processing to the upstream A.
The station side OTU2_BDI secondary alarm. At the same time, the alarm continues to be transmitted to the downstream station of the B station. After the alarm is processed at the C site, the ODU2_PM_AIS minor alarm is reported on the WDM side of the C-site OTU, and the ODU2_PM_BDI secondary alarm is transmitted back to the upstream station A.

TRUE

FALSE

Q143. Which of the following is a good way to avoid creating discrete paths? (Multiple Choice)

The path with the protected route is to be broken or switched. Ensure that the configuration is complete and standardized.

Try to use the path function to configure.

Guide users to learn business configuration specifications.

The service of the single-station configuration should perform path search on the network to ensure that the service configuration is complete and standardized.

Q144. Which of the following monitoring boards do not support the processing and transparent transmission of 1588V2 signals? (Multiple choice)

ST2

SC2

SC1

AST2

Q145. If you want to establish a GE-level path on the NMS, which of the following steps are required? (Multiple choice)

Configure the wavelength

Configure logical connection

Create an OCh path

Create an ODUk path

Q146. Which of the following are limitations of the alarm and performance analysis methods? (Multiple Choice)

Field maintenance personnel cannot understand the current operating condition of the equipment.

The network administrator cannot obtain the current notifications of the device, the alarm occurrence time, and the historical alarm of the device.

When some faults occur, there may be no obvious alarms or performance events reported, and sometimes no alarms or performance events are found.

In the case of complex networking, service, and fault information, many alarms and performance events may occur along with the occurrence of faults. Due to too many reports and performance events, maintenance personnel are unable to analyze.

Q147. When creating an OCh trail by using the board method, the source/sink ports select the corresponding line board and the IN/OUT port of the FIU board.

TRUE

FALSE

Loading …

Passing Key To Getting H31-341 Certified Exam Engine PDF: https://www.testsimulate.com/H31-341-study-materials.html

Get to know about the Best Solution for the preparation of Huawei H31-341 Exam

Leave a Reply Cancel reply