[Dec-2022 Newly Released] 201 Dumps for F5 Networks Certification Study Materials Certified [Q122-Q142]

Q122. When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?

Synching should not be performed.

The first system to be updated will assume the Active role.

This is not possible since both systems are updated simultaneously.

The older system will issue SNMP traps indicating a communication error with the partner.

Q123. Refer to the exhibit.

How are new connections load balanced?

To the first two members listed with the same priority group

To the pool member with the least number of connections

To the pool member with a high priority group value defined

To the pool member with a low priority group value defined

Q124. A BIG-IP Administrator has configured a BIG-IP cluster with remote user authentication against dcOl f5trn.com. Only local users can successfully log into the system. Configsync is also failing.
Which two tools should the 8IG-IP Administrator use to further investigate these issues? (Choose two)

ntpq

pam_timestamp_check

passwd

pwck

dig

Q125. A site is load balancing to a pool of web servers. Which
statement
is true concerning BIGElIP’s ability to verify whether the web servers are functioning properly or not.

Web server monitors can test the content of any page on the server.

Web server monitors always verify the contents of the index.html page.

Web server monitors can test whether the server’s address is reachable, but cannot test a page’s content.

Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.

Q126. An LTM device has a virtual server mapped to www.f5.com with a pool assigned. Users report that when browsing, they are periodically required to re-login to /resources/201.1.7.b.2_l.com. The objects are defined as follows:
Virtual server. Destination 192.168.245.100:443 netmask 255.255.255.0
Persistence: SSL session persistence
Profiles: HTTP/TCP
Which persistence method should the BIG-IP Administrator apply to resolve this issue?

Source address affinity

hexadecimal

SIP

Destination address affinity

Q127. Which statement is true about the synchronization process, as performed by the Configuration Utility or by typing b config sync all.

The process should always be run from the standby system.

The process should always be run from the system with the latest configuration.

The two /config/bigip.conf configuration files are synchronized (made identical) each time the process is run.

Multiple files,
including
/config/bigip.conf and
/config/bigip_base.conf,
are synchronized (made identical) each time the process is run.

Q128. Which three statements describe a characteristic of profiles. (Choose three.)

Default profiles cannot be created or deleted.

Custom profiles are always based on a parent profile.

A profile can be a child of one profile and a parent of another.

All changes to parent profiles are propagated to their child profiles.

While most virtual servers have at least one profile associated with them, it is not required.

Q129. A 8IG-IP device is replaced with an RMA device. The BIG-IP Administrator renews the license and tries to restore the configuration from a previously generated UCS archive on the RMA device. The device configuration is NOT fully loading. What is causing the configuration load to fail?

The Device Group is NOT configured for Full Sync.

The US does NOT contain the full config

The clock is NOT set correctly

The Master Key is NOT restored

Q130. In the BIG-IP Configuration Utility, a user requests a single screen view to determine the status of all Virtual Servers and associated pool members, as well as any iRules in use. Where should the BIG-IP Administrator instruct the user to find this view?

Local Traffic > Monitors

Local Traffic > Virtual Servers

Local Traffic > Network Map

Statistics

Q131. A BIG-IP Administrator uses a device group to share the workload and needs to perform service on a BIG-IP device currently active for a traffic group. The administrator needs to enable the traffic group to run on another BIG-IP device in the device group. What should the administrator do to meet the requirement?

Create a new Traffic Group and then fail to Standby Unit

Select Traffic Group and then select Failover

Select Traffic Group and then select Force to Standby

Select Traffic Group on Primary Unit and then select Demote

Q132. If a client’s browser does not accept cookies, what occurs when the client connects to a virtual server using cookie persistence.

The connection request is not processed.

The connection request is sent to an
pology.server.The connection request is sent to an .pology.server.

The connection request is loadElbalanced to an available pool member.

The connection request is refused and the client is sent a “server not available” message.

Q133. Refer to the exhibit.

How many nodes are represented on the network map shown?

Four

Three

One

Two

Q134. A BIG-IP Administrator finds the following log entry:
tnm tmm[7141]: 011e0002:4: sweeperjjpdate: aggressive mode activated.
Which action should the BIG-IP Administrator to mitigate this memory issue?

Configure the redundant par to be active-active

Decrease the TCP profile ide Timeout value

increase the TCP profile ide Timeout value

Configure the serve to use Connection Mirroring

Q135. A BIG-IP Administrator finds the following log entry after a report of user issues connecting to a virtual server:
01010201: 2: Inet port exhaustion on 10.70.110.112 to 192.28.123.250:80 (proto 6) How should the BIG-IP Administrator modify the SNAT pool that is associated with the virtual server?

Remove the SNAT pool and apply SNAT Automap.

Remove an IP address from the SNAT pool.

Add an address to the SNAT pool.

Increase the timeout of the SNAT addresses.

Q136. Refer to the exhibit.

An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?

The pool associated with the virtual server does not have priority group activation enabled.

The virtual address does not have ARP enabled.

The virtual address does not have route advertising enabled.

The pool associated with the virtual server is falling its health check.

Q137. How should a BIG-IP Administrator control the amount of traffic that a newly enabled pool member receives.

set the Slow Ramp Time

set a Connection Limit

set the Priority Group Activation

set a Health Monitor

Q138. How should a BIG-IP Administrator persistent sessions from being sent to a pool member so that the server administrator can perform maintenance?

force the pool member offline

disable the pool member

add an additional monitor to the poor

disable the virtual server

Q139. Refer to the exhibit.

An organization is reporting slow performance accessing their Intranet website, hosted in a public cloud. All employees use a single Proxy Server with the public IP of 104.219.110.168 to connect to the Internet. What should the BIG-IP Administrator of the Intranet website do to fix this issue?

Change Source Address to 104.219.110.168/32

Change Load Balancing Method to Least Connection

Change Fallback Persistence Profile to source_addr

Change Default Persistence Profile to cookie

Q140. A BIG-IP Administrator makes a configuration change to the BIG-IP device. Which file logs the message regarding the configuration change?

/var/log/messages

/var/log/audit

/var/log/user.log

/var/log/secure

Q141. Assume the bigd daemon fails on the active system. Which three are possible results? (Choose three.)

The active system will restart the bigd daemon and continue in active mode.

The active system will restart the tmm daemon and continue in active mode.

The active system will reboot and the standby system will go into active mode.

The active system will failover and the standby system will go into active mode.

The active system will continue in active mode but gather member and node state information from the standby system.

Q142. Refer to the exhibit.

Which TMSH command generated this output?

tmsh list /cm sync-status

tmsh show /sys sync-status

tmsh list /sys sync-status

tmsh show /cm sync status

Leave a Reply Cancel reply