100% Pass Guaranteed Accurate JN0-611 Answers 365 Days Free Updates [Q11-Q33]

5/5 - (2 votes)

100% Pass Guaranteed Accurate JN0-611 Answers 365 Days Free Updates

JN0-611 DUMPS Q&As with Explanations Verified & Correct Answers

Q11. Referring to the exhibit. You successfully run the Ansible playbook shown in the exhibit. However, you are unable to see the instances you created.
What is the problem in this scenario?

You have incorrectly entered your key information.

You are viewing the correct region in the wrong VPC.

You are viewing the wrong region.

Your s3 bucket was not accessible during the deployment.

Q12. You are deploying a service chain in your cloud environment. You want to have the traffic evaluated by a Layer 3 firewall and a load balancing service before reaching its destination. In this scenario, which service mode should be used?

in-network

firewall

analyzer

transparent

Q13. You are using Contrail Command to configure AWS. You are unable to ping your VMs within the instance you created.
Referring to the exhibit, what is the problem?

You must change the protocols allowed in the “Allow-all-inbound” rule to “ANY”.

Your subnets are in different availability zones.

You must change the direction of the “Allow-all-inbound” rule to “Ingress”.

Your subnets for “Availability zone 1” and “Availability zone 2” must be the same.

Q14. Referring to the exhibit, three microservices are deployed in an OpenShift cluster, each in a separate OpenShift project. The Web pod exposes the Web front end through a service. The App pod exposes an application API through a second service. You are asked to assign Web services external IP addresses out of the 100.64.0.0/24 subnet, and the App AIP external IP addresses from the 100.64.128.0/24 subnet.
How would you accomplish this task?

Use a Contrail network policy to match the microservice IP addresses, and advertise them to the external networks.

Apply the opencontrail.org/fip-pool annotation to each project namespace.

Use an OpenShift network policy applied to each of the exposed microservices.

Configure a namespace isolation policy.

Q15. You are provisioning a service chain to process external subscriber’s traffic in a Contrail OpenStack cluster. Service instances SI-1, SI-2, and SI-3 are firewall instances that permit all traffic. Referring to the exhibit, which two statements are correct? (Choose two.)

The access control lists on vRouters must be modified to permit traffic from the external hosts.

The default security group configuration does not need to be modified.

The access control lists on vRouters are provisioned automatically.

The default security group configuration must be modified to permit traffic from the external hosts.

Q16. Which statement correctly characterizes the VLAN allocation for tenant VMs when Contrail provides overlay network virtualization in a VMware cluster?

All VMs on the same subnet on a single ESXi host share a common VLAN.

All VMs on a single ESXi host have the same unique VLAN.

Each virtual network has a unique VLAN on every ESXi host.

On every ESXi host, each VM has a unique VLAN.

Q17. To which Contrail object does the Kubernetes namespace object translate?

project

tag

firewall policy

load balancer

Q18. You are deploying Contrail Enterprise Multicloud in your environment. You must securely connect your private resources with publicly-hosted resources.
What must be included in this scenario?

AppFormix

Contrail Security

service chaining

Multicloud-Gateway

Q19. Your company uses Kubernetes as an orchestrator integrated with Contrail. You are asked to create the networks shown in the exhibit and enable communication between Pod 1 and Pod 2.
Which three steps must be performed in this scenario? (Choose three.)

Create VN-A and VN-B.

Apply a created network policy.

Assign IP addresses to the pods.

Update permissions in the security group. Create Namespace A and Namespace B.

Q20. Referring to the exhibit, which two statements about OpenShift namespace isolation with a Contrail network is true? (Choose two.)

Pod 1 can communicate with Pod 2.

Pod 1 cannot communicate with Pod 2.

Pod 2 can communicate with Pod 1.

Pod 2 cannot communicate with Pod 1.

Q21. An administrator has created a deployment and exposed the front-end Python service. The Python service is not available.
Referring to the exhibit, what is the problem?

The LoadBalancer objects require a load balancer appliance.

A Kubemetes network policy must be added to permit the traffic.

Contrail SNAT overlay forwarding must be enabled.

A floating IP pool in Contrail must be associated with the service’s namespace to allocate external IPs.

Q22. An OpenShift cluster operator wants to verify the health of the cluster network infrastructure. In this scenario, which method should the operator use to accomplish this task?

Issue the oc get daemonset -n contrail-system command on the master node.

Issue the contrail-status command on the master node.

Issue the contrail-status command on the infrastructure node.

Issue the oc get pods -n contrail-system command on the master node.

Q23. Referring to the exhibit, which two statements are correct when deploying the Kubernetes pod?
(Choose two.)

A pod is created with the name “test”.

Pods are reachable by pods in a different namespace.

Pods are reachable only by pods in the same namespace.

A pod is created with the name “test1”.

Q24. Service instance SI2 is performing source NAT using Ihe pool of addresses shown in the exhibit.
You are verifying connectivity by sending ICMP traffic from the G1 host to the R1 host. You notice that the ICMP requests are received on R1, but the ICMP responses are not received on the G1 host.
In this scenario, what would solve this problem?

You must add static routes to the VMs in the Right VN.

You must add a static route table to SI2.

Apply a network policy to allow traffic from the Left VN toward the Right VN.

You must add static routes to the VMs in the Left VN.

Q25. You are working with Contrail multicloud using Azure cloud. You want to modify the topology to add extra resources. Which two steps must be performed to accomplish this task? (Choose two.)

Edit the topology.dat file.

Execute the modify.yml Ansible playbook.

Edit the topology.yml file.

Execute the modify.sh script.

Q26. Referring to the exhibit, which statement is true about virtual networks A and B so that the vSRX can be used as a service instance in a transparent service chain?

Virtual networks A and B must have the same CIDR addressing.

Virtual networks A and B must be running on different host servers.

Virtual networks A and B must be running on the same host server.

Virtual networks A and B must have different CIDR addressing.

Q27. What is a core component of an AWS cloud environment?

a resource group

a VPC

a VNET

a vRouter

Q28. You want to implement deep packet inspection using a VNF for traffic to and from your servers in the data center. Which service type is valid when implementing this solution using Contrail Command?

NAT

analyzer

firewall

DPI

Q29. Contrail security tags and their values in AWS multicloud deployments are evaluated in which order?

virtual machine, project, virtual network, and virtual machine interface

virtual machine interface, virtual machine, virtual network, and project

project, virtual network, virtual machine, and virtual machine interface

virtual network, project, virtual machine interface, and virtual machine

Q30. Which two statements are correct when deploying or integrating OpenShift with Contrail Enterprise Multicloud? {Choose two.)

Contrail Command for deployment is not supported.

NFS for OpenShift logging is recommended.

When using a load balancer, manually copy the htpasswd file into all of the master nodes.

NTP is installed automatically and synchronized.

Q31. What are two methods to automate the creation of service chains using Contrail Enterprise Multicloud? (Choose two.)

Heat templates

Chef cookbooks

Ansible playbooks

Puppet manifests

Q32. Which two roles does Contrail Enterprise Multicloud place on IP Fabric devices in a centrally- routed environment? (Choose two.)

Leaves are Layer 3 VXLAN gateways.

Leaves are Layer 2 VXLAN gateways.

Spines are Layer 2 VXLAN gateways.

Spines are Layer 3 VXLAN gateways.

Q33. You are considering different designs for your Contrail Enterprise Multicloud installation.
Which design model is shown in the exhibit?

edge-routed bridging overlay

routed overlay using EVPN Type 5 routes

bridged overlay

centrally-routed bridging overlay

JN0-611 dumps Exam Material with 67 Questions: https://www.testsimulate.com/JN0-611-study-materials.html

Leave a Reply Cancel reply