Valid Test Simulate materials for certificate qualification
 
Get 100% Success with Latest HCIA-5G H35-480_V3.0 Exam Dumps Jun 26, 2023 [Q12-Q36]

Get 100% Success with Latest HCIA-5G H35-480_V3.0 Exam Dumps Jun 26, 2023 [Q12-Q36]

4/5 - (1 vote)

Get 100% Success with Latest HCIA-5G H35-480_V3.0 Exam Dumps Jun 26, 2023

The Best H35-480_V3.0 Exam Study Material and Preparation Test Question Dumps

The Huawei H35-480_V3.0 (HCIA-5G-RAN V3.0) Certification Exam is a valuable certification for professionals who are involved in the deployment and maintenance of 5G RAN solutions. This certification validates the candidate’s expertise in 5G RAN technologies and demonstrates their ability to configure, deploy, and troubleshoot 5G RAN solutions. By obtaining this certification, professionals can enhance their career prospects in the telecommunications industry and stay up-to-date with the latest developments in 5G technology.

The H35-480_V3.0 certification exam is intended for professionals who are involved in the design, implementation, and maintenance of 5G RAN networks. This includes network engineers, system integrators, and technical support personnel. The certification exam is also suitable for individuals who are interested in upgrading their skills and knowledge in 5G RAN technology.

 

Q12. Which of the following NR slot configurations are defined in 3GPP specifications? (Choose All that Apply)

 
 
 
 

Q13. Which of the following messages is the first message sent by a gNodeB to an AMF?

 
 
 
 

Q14. The mmWave range is new for NR. It supports the largest bandwidth in a cell but has poor coverage capabilities.It requires high performance from RF components and generally applies only to line of sight (LOS) coverage.

 
 

Q15. Which of the following devices is used to implement service slicing on the 5G RAN side?

 
 
 
 

Q16. During a 5G service test, an NSA UE connects to the Probe and then accesses a 4G cell. It is found that the cell does not deliver B1measurement configurations. Which of the following is not a possible cause for this?

 
 
 
 

Q17. Which of the following devices is used to implement service slicing on the 5G RAN side?

 
 
 
 

Q18. Which of the following functions are implemented by the UBBP board in the BBU5900? (Choose all that Apply)

 
 
 
 

Q19. Which of the following statements about the NR slot structure are correct? (Choose All that Apply)

 
 
 
 

Q20. If the length of the CPRI optical fiber between a BBU and an RRU exceeds 150 m, you are advised to use a multimode fiber.

 
 

Q21. Which of the following MML commands is used to bind a physical sector to an AAU on a gNodeB?

 
 
 
 

Q22. E2E network device update is required for the evolution from 5G NSA networking to SA networking.

 
 

Q23. During single site verification, which of the following messages can be traced by the Probe to analyze problems?

 
 
 
 

Q24. gNodeBs periodically send TPC commands to UEs over PDCCHs to control the transmit power of which of the following uplink channels or signals of UEs?

 
 
 
 

Q25. A larger CQI value indicates a better channel quality.

 
 

Q26. Which downlink data split modes are supported on the gNodeB side in the 5G NSA Option 3x architecture?

 
 
 
 

Q27. Which of the following can be used to check whether an antenna is reversely connected during NR single site verification?

 
 
 
 

Q28. During a 5G test, a portable computer is directly connected to the LAN port of the Huawei CPE through a network cable to obtain a dynamic IP address for communication.

 
 

Q29. Which of the following factors trigger measurement in connected mode in SA networking? (Choose All that Apply)

 
 
 
 

Q30. In what scenarios is GENEX Assistant typically applied? (Choose All that Apply)

 
 
 
 

Q31. What is the maximum number of PCIs supported by a 5G network?

 
 
 
 

Q32. What is the maximum number of PCIs supported by a 5G network?

 
 
 
 

Q33. Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs? (Choose all that Apply)

 
 
 
 

Q34. During 5G single site verification, you only need to test the user access and rate. Other test items are analyzed in drive tests.

 
 

Q35. According to 5G eMBB service requirements, which of the following is the minimum rate required for network edge coverage?

 
 
 
 

Q36. Which of the following signals is measured by a 5G UE to report channel quality information such as the CQI, RI, and PMI to a gNodeB?

 
 
 
 

The Huawei H35-480_V3.0 (HCIA-5G-RAN V3.0) Certification Exam is a professional certification exam that focuses on the field of 5G Radio Access Network (RAN) technologies. The exam is designed to evaluate the knowledge and skills of individuals who aspire to become certified HCIA-5G-RAN V3.0 professionals. The certification exam is conducted by Huawei and is globally recognized, providing a competitive edge to individuals who pass the exam.

 

Get Ready to Pass the H35-480_V3.0 exam Right Now Using Our HCIA-5G Exam Package: https://www.testsimulate.com/H35-480_V3.0-study-materials.html

Related Links: www.stes.tyc.edu.tw willysforsale.com myportal.utt.edu.tt www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below