Achieve the HPE2-T37 Exam Best Results with Help from HP Certified Experts [Q14-Q35]

4.5/5 - (4 votes)

Achieve the HPE2-T37 Exam Best Results with Help from HP Certified Experts

Provide HPE2-T37 Practice Test Engine for Preparation

To prepare for the HP HPE2-T37 Exam, candidates should have a solid understanding of HPE infrastructure and the principles of IT management. They should also have experience with HPE OneView and be familiar with its capabilities and features. Candidates can prepare for the exam by taking training courses, reading documentation, and practicing with HPE OneView in a lab environment. Passing the HP HPE2-T37 Exam is a valuable credential for IT professionals who want to demonstrate their expertise in managing HPE infrastructure with HPE OneView.

NO.14 Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?

The other networks are not configured with the required Smart Link parameter.

The other networks are not added to the Logical Interconnect Group configuration.

The other networks have Private Network’ selected, which hides them from Compute Modules.

The other networks are configured with a purpose other than General or Management.

NO.15 Which statement about M-LAG setup is true?

When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.

M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.

sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.

M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.

NO.16 How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

NO.17 Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?

As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.

One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame.

If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.

As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.

NO.18 Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?

As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.

One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.

If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.

As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.

NO.19 You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?

to provide static IP addresses to IL0 and interconnect modules if applicable

to provide static IP addresses for an operating system running on a Compute Module

to provide static IP addresses for Logical Interconnects and Logical Enclosures

to provide static IP addresses for storage systems managed in HPE OneView

NO.20 As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

NO.21 Refer to the exhibit.

Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?

There are not sufficient frames for highly available setup.

Some master modules only support a redundant setup.

Firmware on the master modules is too low to support highly available setup.

A dedicated license must be added to HPE OneView to enable this feature.

NO.22 Refer to the exhibit.

You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?

The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.

HPE OneView was restored from a backup that created inconsistency with the server profile template.

Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.

Changes to the server profile were implemented directly on the server profile.

NO.23 For HPE Primera, match each task with the management tool that can be used to perform it.

NO.24 You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?

Imported volumes are treated as private volumes and can be only used boot volumes

Volumes imported to HPE OneView is managed just like a volume created using HPE OneView

Volumes imported to HPE OneView cannot be removed using the HPE OneView interface

A snapshot for imported volumes can be ceated only by using array management tools

NO.25 Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?

Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.

Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.

HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.

HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.

NO.26 Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?

A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.

A logical JBOD cannot be created during server profile creation and must be prepared in advance

Different types of the drives can be used within a logical JBOD as long as they have the same capacity

Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator

NO.27 Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?

HPE Management Agent must he installed for for HPE ProLiant Gen 10 servers.

HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.

Not all of the features will be available for HPE ProLiant G7 systems.

HPE ProLiant Gen 10 servers do not need an HPE OneView license.

NO.28 What step must be taken to add an HPE SuperDome Flex to an existing OneView environment

A Rack Management Controller must be added to HPE OneView.

HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.

Each HPE Superdome Flex chassis must be added Individually using BMC IP.

HPE Superdome Flex complex can be added by adding base chassis of this complex.

NO.29 Your customer wants to manage their HPE Superdome Flex using HPE OneView.
Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

NO.30 Your customer plans to monitor HPE ProLiant DL systems and HPE BladeSystem using HPE OneView Which license is required to accomplish this task?

HPE One View Global Dashboard license

HPE OneView Advanced license

HPE composer 2 license

HPE OneView standard license

NO.31 Which types of support dump can be created using HPE OneView? (Select two.)

Enclosure group support dump

Appliance support dump

Firmware deployment support dump

Logical enclosure support dump

Maintenance console support dump

NO.32 Refer to the exhibit.

Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?

There are not sufficient frames for highly available setup.

Some master modules only support a redundant setup.

Firmware on the master modules is too low to support highly available setup.

A dedicated license must be added to HPE OneView to enable this feature.

NO.33 You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.

NO.34 You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?

A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.

A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.

An external repository must be created, because standalone components are supported only In an external repository.

ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.

NO.35 Which statement regarding HPE OneView backup restore is true?

During backup restore, users with Administrator privileges can still login to HPE OneView

An HPE OneView backup can be used to restore individual components like server profile

Users with Backup Administrator privileges can restore an HPE OneView backup

Only users with Infrastructure Administrator privileges can restore an HPE OneView backup

HPE2-T37 exam is a multiple-choice exam that consists of 50 questions. Candidates have 1 hour and 30 minutes to complete the exam. The passing score for the HPE2-T37 exam is 70%. Upon passing the exam, candidates will receive an HPE certification that validates their expertise in using HPE OneView.

Detailed New HPE2-T37 Exam Questions for Concept Clearance: https://www.testsimulate.com/HPE2-T37-study-materials.html

Leave a Reply Cancel reply