[Nov-2022] 98-366 Questions – Truly Beneficial For Your Microsoft Exam [Q154-Q169]

[Nov-2022] 98-366 Questions – Truly Beneficial For Your Microsoft Exam

Download Microsoft 98-366 Sample Questions

NEW QUESTION 154
What port does DNS use?

 443

 389

 51

 53

NEW QUESTION 155
The function of a router is to:

 Provide IP subnet masks for hosts.

 Forward traffic to other networks.

 Broadcast routing tables to clients.

 Store tables for name resolution.

Explanation/Reference:
A router is a device that forwards data packets along networks. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISP’s network. Routers are located at gateways, the places where two or more networks connect.

NEW QUESTION 156
When a signal degrades as it runs through a wire, you have ________.

 Degradation

 Attenuation

 Cross Over

 Resistance

NEW QUESTION 157
This question requires that you evaluate the underlined text to determine if it is correct.
WEP wireless encryption is the most susceptible to interception and decryption.
Select the correct answer if the underlined text does not make the statement correct.
Select ‘No change is needed” if the underlined text makes the statement correct

 WPA-AES

 WPA2

 WPA-PSK

 No change is needed

Several weaknesses have been discovered using WEP encryption that allows an attacker using readily available software to crack the key within minutes.

NEW QUESTION 158
List the four steps for a client to get an IP address from a DHCP server in the correct order

 Discovery Offering Request Acknowledge

 Request Offering Discovery Acknowledge

 Discovery Request Offering Acknowledge

 Request Offering Discovery Acknowledge

NEW QUESTION 159
What are two differences between switches and hubs? (Choose two.)

 Switches are slower than hubs because of the extra addressing functions that switches perform.

 Switches send data to all of the computers that are connected to them for efficiency.

 Switches are capable of sending and receiving data at the same time.

 Switches identify the intended destination of the data that they receive.

Hubs repeat everything they receive and can be used to extend the network.
Switches control the flow of network traffic based on the address information in each packet. A switch learns which devices are connected to its ports (by monitoring the packets it receives), and then forwards on packets to the appropriate port only. This allows simultaneous communication across the switch, improving bandwidth.

NEW QUESTION 160
You are setting up a network computer game.
You need to open up ports on your firewall so your friends can join the network.
Which command displays the ports that your computer is listening for?

 nslookup

 nbtstat

 ping

 netstat

Netstat (network statistics) is a command-line tool that displays network connections for the Transmission Control Protocol (both incoming and outgoing), routing tables, and a number of network interface (network interface controller or software-defined network interface) and network protocol statistics.
Incorrect:
Not A: nslookup is used for DNS troubleshooting.
Not B: Nbtstat is designed to help troubleshoot NetBIOS name resolution problems.
Not C: ping is used to troubleshoot network connectivity.

NEW QUESTION 161
Tracert is used to:

 Manage routing tables dynamically.

 Manage session-oriented connections between nodes.

 Report the route taken by packets across an IP network.

 Report the shortest route between different networks.

Explanation/Reference:
In computing, traceroute (treacert) is a computer network diagnostic tool for displaying the route (path) and measuring transit delays of packets across an Internet Protocol (IP) network.

NEW QUESTION 162
Hotspot Question
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Each correct selection is worth one point.

Explanation:
* No. IPv6 addresses are 128 bit in length.
* No.No.
IPv6 addresses are written in eight groups of four hexadecimal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334.

NEW QUESTION 163
Your home computer is having problems accessing the Internet.
You suspect that your Internet router’s DHCP service is not functioning, so you check your computer’s IP address.
Which address indicates that your router’s DHCP service is NOT functioning?

 169.254.1.15

 172.16.1.15

 192.168.1.15

 10.19.1.15

Explanation/Reference:
169.254.1.15 is an APIPA address. An APIPA address is used when the DHCP server is not available.

NEW QUESTION 164
What are two advantages of using star topology rather than ring topology in a computer lab workgroup?
(Choose two.)

 Failure of a central connectivity device does not bring down the entire network.

 A central connection point allows for flexibility and scalability.

 Data travels on redundant paths, so one cable cannot stop its transmission.

 A cable problem within the group affects two nodes, at most.

Explanation

NEW QUESTION 165
Your network is reconfigured as multiple subnets. Your company needs to support legacy NetBIOS applications across subnet boundaries.
Which should you use for name resolution?

 DNS server

 Client HOSTS file

 WINS server

 NetBIOS broadcasts

NEW QUESTION 166
What is the purpose of a Media Access Control (MAC) address?

 identify a network device to the Internet

 uniquely identify a physical network device

 manage permissions for shared network resources

 provide a routing address on a local area network (LAN)

https://www.techopedia.com/definition/25059/media-access-control-mac

NEW QUESTION 167
What are three advantages of VLANs? (Choose three.)

 They can logically address packets by using IP.

 They require a router to connect to VLANs on another switch.

 They compartmentalize a network and isolate traffic.

 They are efficient because a single switch can implement only a single VLAN.

 They act as though they are on the same LAN regardless of physical location.

VLANs provide the following advantages:
* (E) VLANs enable logical grouping of end-stations that are physically dispersed on a network. …
* VLANs reduce the need to have routers deployed on a network to contain broadcast traffic. …
* (C) Confinement of broadcast domains on a network significantly reduces traffic.
By confining the broadcast domains, end-stations on a VLAN are prevented from listening to or receiving broadcasts not intended for them.
* (B) If a router is not connected between the VLANs, the end-stations of a VLAN cannot communicate with the end-stations of the other VLANs.

NEW QUESTION 168
What feature within Windows allows the server to act as a router?

 IPsec

 DHCP

 IP forwarding

 RDC

NEW QUESTION 169
To which IP configuration does the CIDR notation 192.168.1.1/25 refer?

 192.168.1.1 255.255.255.64

 192.168.1.1 255.255.255.1

 192.168.1.1 255.255.255.32

 192.168.1.1 255.255.255.256

 192.168.1.1 255.255.255.128

Explanation/Reference:

Reference: http://www.subnet-calculator.com/

 Loading …

Topics of Microsoft 98-366 : Networking Fundamentals

Candidates must know the exam topics before they start of preparation.
because it will really help them in hitting the core.
Our Microsoft 98-366 : Networking Fundamentals exam dumps will include the following topics:

1. Understanding network infrastructures (30-35%)

Understand the concepts of Internet, intranet, and extranet

• Virtual Private Network (VPN), security zones, firewalls

Understand local area networks (LANs)

• Perimeter networks; addressing; reserved address ranges for local use (including local loopback IP), VLANs; wired LAN and wireless LAN

Understand wide area networks (WANs)

• Leased lines, dial-up, ISDN, VPN, T1, T3, E1, E3, DSL, cable modem, and more, and their characteristics (speed, availability)

Understand wireless networking

• Types of wireless networking standards and their characteristics (802.11a,b,g,n,ac including different GHz ranges), types of network security (WPA, WEP, 802.1X, and others), point-to-point (P2P) wireless, ad hoc networks, wireless bridging

Understand network topologies and access methods

• Star, mesh, ring, bus, logical and physical topologies

2. Understanding network hardware (20-25%)

Understand switches

• Transmission speed, number and type of ports, number of uplinks, speed of uplinks, managed or unmanaged switches, VLAN capabilities, Layer 2 and Layer 3 switches and security options, hardware redundancy, support, backplane speed, switching types and MAC table, understand capabilities of hubs versus switches, virtual switches

Understand routers

• Transmission speed considerations, directly connected routes, static routing, dynamic routing (routing protocols), RIP vs. OSPF, default routes; routing table and how it selects best route(s); routing table memory, Network Address Translation (NAT), software routing in Windows Server, installing and configuring routing; Quality of Service (QoS)

Understand media types

• Cable types and their characteristics, including media segment length and speed; fiber optic; twisted pair shielded or unshielded; catxx cabling, wireless; susceptibility to external interference (machinery and power cables); susceptibility to electricity (lightning), susceptibility to interception

3. Understanding protocols and services (45-50%)

Understand the Open Systems Interconnection (OSI) model

• OSI model; Transmission Control Protocol (TCP) model; examples of devices, protocols, applications, and which OSI/TCP layer they belong to; TCP and User Datagram Protocol (UDP); well-known ports for most used purposes (not necessarily Internet); packets and frames

Understand IPv4

• Subnetting, IPconfig, why use Internet Protocol version 4 (IPv4), addressing, ipv4toipv6 tunneling protocols to ensure backward compatibility, dual IP stack, subnetmask, gateway, ports, packets, reserved address ranges for local use (including local loopback IP)

Understand IPv6

• Subnetting, IPconfig, why use IPv6, addressing, ipv4toipv6 tunneling protocols to ensure backward compatibility, dual IP stack, subnetmask, gateway, ports, packets, reserved address ranges for local use (including local loopback IP)

Understand names resolution

• DNS, resource records, Windows Internet Name Service (WINS), steps in the name resolution process, HOSTS file, LMHOSTS file

Understand networking services

• Dynamic Host Configuration Protocol (DHCP), Network Address Translation (NAT), firewalls, remote access, VPN

Understand TCP/IP

Tools (such as ping), tracert, pathping, Telnet, IPconfig, netstat, reserved address ranges for local use (including local loopback IP), protocols

The Microsoft 98-366 exam aims at testing the ability of the candidates to perform fundamental networking operations.

The individuals enrolling in the Microsoft 98-366 certification exam have already been introduced to basic networking concepts and technologies. In particular, the candidates are required to have hands-on experience with network management tools, Windows-based networking, Windows Server, name resolution process, TCP/IP, Domain Name Services, network topologies and protocols. Passing exam 98-366 grants you MTA: Networking Fundamentals certification.

The Microsoft 98-366 certification exam is available in various languages, including English, Russian, Simplified and Traditional Chinese, Spanish, German, Japanese, French, Korean, Italian, and Portuguese. Besides just getting theoretical concepts, one is also needed to be good at the practical bit; after all, networking is all about practical stuff.

Truly Beneficial For Your Microsoft Exam: https://www.testsimulate.com/98-366-study-materials.html

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw myportal.utt.edu.tt app.parler.com www.stes.tyc.edu.tw