Cisco 500-920 Certification Exam Dumps with 42 Practice Test Questions [Q11-Q30]

Rate this post

Cisco 500-920 Certification Exam Dumps with 42 Practice Test Questions

New 500-920 Exam Dumps with High Passing Rate

Cisco 500-920 Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshoot data center unified computing
Topic 2	Troubleshoot FEX
Topic 3	Troubleshoot virtualization solutions
Topic 4	Troubleshoot storage area networks, including Fibre Channel, FCoE, zoning, NPV, and NPIV

NEW QUESTION 11
In a Cisco UCS Manager, if all KVM sessions to each server fail to start, what is likely causing the problem?

Cisco UCS Manager has a problem

The Fabric Interconnect to which you are connected has a problem

The I/O Modules in the chassis are the problem

The workstation you are using to connect to the KVM session is the problem

NEW QUESTION 12
A Hard Drive (HDD) has been hot swapped in a UCS server blade, however, the UCS Manager GUI is not displaying updated metrics about the replacement drive. What action will be required to properly display updated metrics?

Remove and re-insert the server blade HDD controller mezzanine card

Reboot the Fabric Interconnects

Reboot the server.

Use the CLI, since HDD metrics cannot be displayed with the UCS Manager GUI

NEW QUESTION 13
Which two formats can be configured for Cisco’s Call Home email message? (Choose two )

JSON

CSV

Full text

XML

NEW QUESTION 14
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )

XML API Access

Web Access

In-band Access

SNMP

Out-of-Band Access

NEW QUESTION 15
Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?

The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch

The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects

The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

NEW QUESTION 16
You are in the process of upgrading your UCS M3 Server to a newer UCS M4 Server. You associate the Service Profile to the new UCS Server, but it fails to boot You suspect of a failed boot hard drive. You check your RAID1 Boot LUN in UCS Manager, but see no error messages What could be causing the issue?

The newer Cisco UCS M4 Server is using flash drives, not hard drives

The newer Cisco UCS M4 Server is using disks of larger capacity than the previous UCS M3 Server

A misconfiguration on the Service Profile Local Boot Policy

A misconfiguration on the Service Profile Local Disk Policy

NEW QUESTION 17
What occurs that causes a Split Brain Issue with Fabric Interconnects?

The subordinate Fabric Interconnect detects heartbeat failure and declares itself primary

Manage configuration changes made with UCS Manager

A quorum tie occurs that must be resolved by the SEEPROM

Both cluster links fail

NEW QUESTION 18
When configuring UCS SAN Connectivity to a 3rd Party FibreChannel Storage Array that is connecting directly to the UCS Fabric Interconnects, which option is Cisco recommended’?

Connect the Storage Array to a RC Storage Port and Enable NPV Mode on the UCS Fabric Interconnects

Connect the Storage Array to an Appliance Port and Enable NPV Mode on the UCS Fabric Interconnects

Direct connectivity between UCS Fabric Interconnects and FibreChannel Storage Arrays is not supported

Connect the Storage Array to a FC Storage Port and Enable Switching Mode on the UCS Fabric Interconnects

Connect the Storage Array to an Appliance Port and Enable Switching Mode on the UCS Fabric Interconnects

NEW QUESTION 19
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )

Compatible Cisco Nexus Fabric Extenders

Cisco Management Controller

Compatible UCS VIC adapter installed via the server’s PCIe or MLOM slot

Compatible UCS 6200 or 6300 Fabric Interconnects

Compatible Cisco UCS Manager version

NEW QUESTION 20
Which statement is true regarding the UCS Manager GUI is showing “Overall Status Unassociated” in the General tab for a C-series server?

The server has a service profile assigned, but has connectivity issues with UCS Manager

The server is not properly connected

The server does not have a service profile assigned, but has been discovered by UCS Manager

The server has been properly connected, but has not been discovered by UCS Manager

NEW QUESTION 21
You are experiencing intermittent connectivity issues on one specific Cisco UCS server Some applications work, while other do not transfer data You suspect jumbo frames limitations Which two places do you check the jumbo frame settings? (Choose two )

Check server’s service profile and/or service profile template

Check server’s QoS System Class

Check the fibre channel port configuration for jumbo frame configuration

Check upstream switch ports frame size configuration

Check server’s individual vNICs and/or vHBAs properties

NEW QUESTION 22
An overvoltage condition has occurred on a UCS server However the Cisco IMC System Event Log (SEL) file is full What is the resulting fault logging action?

The newest entry in the SEL will be overwritten by the overvoltage condition event.

The oldest entry in the SEL will be overwritten by the overvoltage condition event

The SEL is not used to record server related events, such as overvoltage conditions.

The overvoltage condition event will not be recorded in the SEL.

NEW QUESTION 23
If a Cisco UCS B-Series server fails to initialize, which method of access is required to troubleshoot?

Use direct console access to troubleshoot initialization

Use Cisco UCS Manager GUI to troubleshoot initialization

Use Cisco UCS Manager API to troubleshoot initialization

Use KVM console to troubleshoot initialization

NEW QUESTION 24
The UCS Chassis Discovery Policy has been set to four and a new chassis is connected with two links What is the resulting chassis recognition action?

The chassis will not be recognized

The Chassis Discovery Policy will automatically reset to two links, since it always tracks the physical connections

The chassis will be recognized and both links will be active

The chassis will be recognized but only one of the links will be active.

NEW QUESTION 25
Which two statements describes connecting the IO Modules in the UCS chassis to the Fabric interconnects? (Choose two )

Connect Fl-A to the IOM B of each chassis

Connect Fl-B to IOM A and IOM B in each chassis

Connect Fl-A to the IOM A of each chassis

Connect Fl-A to IOM A and IOM B in each chassis

Connect Fl-B to the IOM A of each chassis

Connect Fl-B to the IOM B of each chassis

NEW QUESTION 26
Which are two Application Gateways primary roles? (Choose two )

Manage configuration changes during FSM transitions

Communicate with virtual machines and report health and state

Automate updates to the XML Database

Communicate with end points and report their health and state

Manage configuration changes made with UCS Manager

Get 500-920 Braindumps & 500-920 Real Exam Questions: https://www.testsimulate.com/500-920-study-materials.html

Cisco 500-920 Exam Syllabus Topics:

Leave a Reply Cancel reply