[2022] Use Valid VMCE2021 Exam – Actual Exam Question & Answer [Q35-Q55]

Rate this post

[2022] Use Valid VMCE2021 Exam – Actual Exam Question & Answer

Test Engine to Practice VMCE2021 Test Questions

NEW QUESTION 35
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?

Perform failback to VM within the same subnet

The VM replica must be created with the “Use Changed Block Tracking data” option enabled

Indexing must be enabled for the original VM

The VM replica must have access to the repository where the full backup of the VM resides

NEW QUESTION 36
A company has been running off replicated, business-critical VMs at their disaster recovery location since an earthquake near the primary data center occurred. Since the threat has passed, they want to stop the replicas and switch to the VMs at the primary data center without losing data. Which of the following actions is the first step they should take?

Failover

Permanent failover

Commit failback

Failback to production

Planned failover

Undo failover

NEW QUESTION 37
Which Vepdm Backup & Replication feature component is able to utilize Microsoft SQL Server transaction log backups for point-in-time restore?

U-AIR Microsoft SQL Recovery wizard

Instant Recovery

Full VM Restore

Veeam Explorer for Microsoft SQL

NEW QUESTION 38
A company has outgrown their current data center and plans to use the second data center as the new primary and needs to migrate their workloads. They are running VMware in both data centers. Which steps would allow this migration to occur without any data loss?

1. Replication job
2.Failover plan
3.Permanent failover

1. Backup job
2.Instant VM Recovery
3.Finalize the Instant VM Recovery

1. Replication job
2.Failback
3.Commit failback

1. Replication job
2.Planned failover
3.Permanent failover

NEW QUESTION 39
Which of the following statements are true when comparing a synthetic full backup to an active full backup on an NTFS-based backup repository? Choose two options.

If the backup repository performance is weak, creating synthetic full backups is the best choice.

Synthetic full backups consume more network bandwidth.

Synthetic full backups impose less load on the production environment.

In terms of content and retention, the synthetic full backup file is identical to an active full backup file.

Synthetic full backups are always best when launched on a dedupe appliance.

The synthetic full backup file has a .vsb extension, whereas the active full backup has a .vbk extension.

NEW QUESTION 40
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?

Re-add all Veeam components involved in data transfer through the required interfaces

Update routing tables on the components involved in data transfer

Create a global network traffic rule, set appropriate source and target IP range

Use the preferred network settings to switch to data network for the backup traffic

NEW QUESTION 41
A company is required to have a daily backup with a retention of at least six weeks. The backups are running every eight hours during the day. From the options provided, what backup job would you advise based on their SLA and best practices?

Forever forward incremental backup, with default job settings enabled

Forever forward incremental backup, with a retention of 42 restore points, savings six weekly full backups

Forever forward incremental backup, with a retention of 42 restore points

Forward incremental backup with weekly synthetic full backups and a retention of 42 days

NEW QUESTION 42
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?

In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM

Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler

Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM

In the virtual machines setting of the job, add a script in the scripts tab under “Run the following script before the job:”

NEW QUESTION 43
A company has the following requirements:
Mission-critical VMs: hourly replication to disaster recovery site, daily backups of these VMs should be available at the disaster recovery site when required, the mission critical applications need to be available within 20 minutes.
Business-important VMs: daily backups should be stored at the disaster recovery site. When required, the business-important applications need to be available within four hours.
Define the RPO and RTO for the company’s disaster recovery site.

Mission-critical VMs: RPO = 60 minutes, RTO = one hour; business-important VMs: RPO = 60 minutes, RTO = four hours

Mission-critical VMs: RPO = 24 hours, RTO = 20 minutes; business-important VMs: RPO = 24 hours, RTO
= four hours

Mission-critical VMs: RPO = 60 minutes, RTO = 20 minutes; business-important VMs: RPO = 24 hours, RTO = four hours

Mission-critical VMs: RPO = 24 hours, RTO = four hours; business-important VMs: RPO = 24 hours, RTO = four hours

NEW QUESTION 44
Which storage optimization option uses a block size of 512 KB?

LAN target

WAN target

Local target (large blocks)

Local target

NEW QUESTION 45
A NAS backup job has been configured within Veeam Backup & Replication, and is completing successfully, but restore operations have been failing for the last few days. What is causing the failure?

The backup repository is sealed

The server was added by using an IQN alias which is unable to be resolved

The credentials added to the share are not allowed read-write access to the share, directories or files

The cache repository assigned for this file share is unavailable for restore operations

NEW QUESTION 46
It the Backup Administrator has to perform a backup over a high-latency, low bandwidth network link, how can the disruptions to the backup process be avoided?

By making a direct backup using WAN accelerator.

By adding additional WAN accelerators to the target site.

By making a backup locally and utilizing WAN accelerators for a backup copy Job.

By adjusting the compression and deduplication settings for this Job.

NEW QUESTION 47
What transport mode does the Linux backup proxy support?

Automatic

Network

Direct storage access

Virtual appliance

NEW QUESTION 48
Which procedure is used to finalize replica failback?

Migrate to production

VMware Storage vMotion

Replica failback does not need to be finalized

Commit failback

Quick Migration

NEW QUESTION 49
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?

A distributed virtual switch with uplink(s)

A standard virtual switch with uplink(s)

A distributed virtual switch without uplink(s)

A standard virtual switch without uplink(s)

NEW QUESTION 50
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs. What could be the reason? (Choose two.)

VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores

Jobs are configured as per VM and these particular VM’s need more fulls

VM retention is set to do full backups more often than others in the job

The VM is in a backup chain and trapped inside a single retention file

The VMs were moved to different datastores manually

NEW QUESTION 51
Which of the following is required to enable tape parallel processing?

The source repository for the tape job is a scale out backup repository.

The tape library has multiple drives.

Two tape jobs are processed at the same time.

The tape drive has multiple tapes.

NEW QUESTION 52
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)

High CPU usage

Veeam backup activity

Snapshot creation

Storage snapshot deletion

Storage snapshot creation

Snapshot deletion

NEW QUESTION 53
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?

The old restore points will be deleted after the new restore chain meets the retention policy

Per VM backup files are enabled in the repository

The other restore points are weekly full backups, this is expected

You should configure the synthetic full backup to be performed on Mondays instead

NEW QUESTION 54
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m. and the administrator fails over the replica at 8 a.m. When the power comes back on, the administrator performs the “failback” action at 2 p.m.
and checks the state of the original VM. They recognize that not all data is available. What is missing?

Data from 1 a.m. to 7 a.m.

Data from 1 a.m. to 2 p.m.

Data from 8 a.m. to 2 p.m.

Data from 7 a.m. to 8 a.m.

NEW QUESTION 55
Which of the following statements is true regarding the Veeam Backup & Replication integration with supported Storage Systems for VMware vSphere are true? (Choose three).

On storage accesses through NFS, VMs with snapshots will be skipped from Backup from Storage Snapshots

Veeam Backup & Replication can backup virtual machines from a supported secondary storage array

On storage accessed through NFS, VMs with snapshots can be protected with Backup from Storage Snapshots

When Backup from Storage Snapshots is performed, VMware shapshot is never utilized

Enabling Backup from Storage Snapshots for all backup jobs are not recommended

VMCE2021 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.testsimulate.com/VMCE2021-study-materials.html

Leave a Reply Cancel reply