2022 Updated ISQI CTFL-AuT Certification Study Guide Pass CTFL-AuT Fast [Q14-Q34]

4.5/5 - (2 votes)

2022 Updated ISQI CTFL-AuT Certification Study Guide Pass CTFL-AuT Fast

CTFL-AuT Dumps PDF 2022 Program Your Preparation EXAM SUCCESS

ISQI CTFL-AuT Exam Syllabus Topics:

Topic	Details
Topic 1	Assessment levels and capability indicators Project aspects influenced by standards (K1)
Topic 2	Influence of AUTOSAR on the work of the tester (K1) Application areas and boundary conditions of a HiL test environment
Topic 3	Application areas and boundary conditions of a SiL test environment Automotive-specific static and dynamic test techniques
Topic 4	Differences between Closed-Loop and Open-Loop (K2) Contribution of the tester to the safety culture
Topic 5	Verification strategy and criteria for unit verification (SWE.4) Motivation for a test environment in the automotive development (K1)
Topic 6	Advantages and disadvantages oftesting in the XiL test environments Integration of the tester in the safety lifecyle (K2)

QUESTION 14
Which test documentis required according to Automotive SPICE?

Test procedure specification

Test management report

Test metrics report

Load testing report

QUESTION 15
Which of the statements regarding traceability in Automotive SPICES3.x is true?

The linking of requirements, test cases and test togs provides traceability and enables the desired verification of test cases for test case coverage

A1:N relation exists; for example If a test case is tested with the help of several requirements and is therefore linked to several requirements

The linking of a requirement, a derived test case and the associated test implementation provides the base for a complete testability.

With complete tractably It Is possible to trace test cases to their requirements and test cases which have been executed to their corresponding results.

QUESTION 16
In which volume of ISO 26262 does the tester find requirements and recommendations for test- and verification-specific aspects of the SOFTWARE level?

Volume 7 (ISO 26262-7)

Volume 6 (ISO 26262-6)

Volume 6 (ISO 262624)

Volume 4 (ISO 26262-4)

QUESTION 17
Which Automotive Safety Integrity Levels does ISO 26262 describe?

ASIL A, ASIL B, ASIL C, ASIL D

MlL, SiL, PiL, HiL, ViL

QM, ASH A, ASIL B, ASIL C, ASIL D

N (None), P (Partly). L (Largely). F (Fully)

Explanation
There are four ASILs identified by ISO 26262A, B, C, and D. ASIL A represents the lowest degree and ASIL D represents the highest degree of automotive hazard.
https://www.synopsys.com/automotive/what-is-asil.html#:~:text=There%20are%20four%20ASILs%20identified

QUESTION 18
Which statement regarding requirements-based testing is true?

Requirements-based testing can be combined with other lest practices or testing techniques.

Requirements-based testing can solve issues like complete requirements

Only extensive and delated requirements can be covered completely by the tester.

Requirements-based testing is a testing technique

QUESTION 19
Which statement regarding AUTOSAR Is TRUE?
AUTOSAR describes…

…a collection of characteristics of the performance of processes of an organization.

…an open and standardized software architecture for vehicle development.

…an analysis unit, which processes Input signals and determines intermediate values and their respective output signals by using existing information.

…activities, methods and measures to achieve functional security for electric and electronic solutions.

Explanation
https://www.pathpartnertech.com/software-architecture-autosar-for-automotive-embedded-system/

QUESTION 20
Which statement regarding the design of a MIL test environment Is TRUE?

To execute the tests, the tester needs a computer and the correspond^) simulation software, including the environmental model.

Interface and integration tests are two test types or test levels that can only be applied in a Mil test environment.

In the MIL test environments, the simulation time runs in real time because the software is running on real hardware.

The test environment includes a real time capable computer, which can capture ail relevant signals r time

QUESTION 21
Which statement regarding the comparison of the test levels In ISO 26262, ASPICE and CTFL Is true?

CTFL, ASPICE and ISO 26262 use the term .system’ for a product consisting of a hardware and a software component

The following lest levels are equivalent: acceptance test (CTFL). ISO 26262 safety validation (ISO
26262.4-9) and system integration test (ASPICE SYS.4),

ASPICE and ISO 26262 do not have an equivalent for system testing (CTFL).

The following test levels are equivalent: component test (CTFL), software unit test (ISO 26262.6-9) and software component verification (ASPICE. SVYE.4).

QUESTION 22
Which of the following statements regarding the application of standards is true?

The application of standards helps to create transparent communication between the project stakeholders.

The application of standards which standardize products has the sole purpose to reduce project risks

The application of standards primarily alms at reducing costs.

The application of standards reduces the efficiency of agile projects

QUESTION 23
Which of the following options describes a relevant aspect of the design of a test environment for software-ln-the-loop (SIL)?

A wrapper is used as part of the testing with Software-in-the-Loop (SiL)

Software-m-the-Loop (SL) needs an Interface to the real vehicle or prototype.

With Software4rMhe-loop (SI), the tested software is implemented m a real control unit,

For Software-in-the-Loop (SIL). usually no specific hardware is used

QUESTION 24
Which statement regarding the test levels In a test environment is true?

For integration tests SiL Mil and HiL test environments are suitable

For load and stress tests. MIL and HiL test environments are suitable

The correct classification of the test levels has no died influence on the safety relevance of the test object (with regard to ISO 26262).

For component tests, St and MiL test environments are suitable

QUESTION 25
Which statement about databases is INCORRECT?

Databases describe the signals of a communication channel.

Databases define the implementation of the communication protocol

Databases include information about input and output signals.

Databases can be described using ASAM-standards

QUESTION 26
Which of the following options Is NOT a general part of a test environment?

Test plan

Laboratory

Real-time PC

Communication device

QUESTION 27
Which constraints does a SiL test environment have?

Numerous internal signals of the test object can be stimulated or observed.

The test execution can be paused anytime for further analyses.

Electric error scenarios can be tested early.

In the SiL environment the simulation time is generally shorter than the real time.

QUESTION 28
In the release process, which of the following work products. Information and documents are the typical output of the tester?

Tested lest objects

Insulation recommendation

Non-detected defects

Change request

QUESTION 29
Which of the following measures is MOST suitable for dealing with the increasing complexity of product development?

Recruitmentof additional employees

Use of experienced employees as coaches for new inexperienced employees

Creation of new subsidiaries(e g. Romania, India)

Use of several models as variants of a common platform

Loading …

Get Perfect Results with Premium CTFL-AuT Dumps Updated 42 Questions: https://www.testsimulate.com/CTFL-AuT-study-materials.html

ISQI CTFL-AuT Exam Syllabus Topics:

Leave a Reply Cancel reply