Get Ready with HPE3-U01 Exam Dumps (2023) [Q31-Q54]

Rate this post

Get Ready with HPE3-U01 Exam Dumps (2023)

Realistic HPE3-U01 Dumps are Available for Instant Access

HP HPE3-U01 Exam Syllabus Topics:

Topic	Details
Topic 1	Describe the encapsulation process and headers Explain Different Media type
Topic 2	Differentiate between local and server-based mgmt Convert Numbering Systems Numerical Conversion
Topic 3	Compare and describe Collison and Broadcast domains Describe MAC address and ARP forwarding tables
Topic 4	Aruba Central as a Cloud-Based Mgmt platform Explain MAC table-based switching
Topic 5	RF Communications – RF signal propagation Network Communications Model
Topic 6	Management and control frames Inter-VLAN routing process
Topic 7	Central requisites and communication to AP Antenna usage and fundamentals
Topic 8	Aruba OS-CX Network Operating System- CLI contexts Defining networking, LAN, WAN and their components
Topic 9	Stages of the Central wizard to deploy a WLAN Compare Unicast, Multicast, and Broadcast

NO.31 What are characteristics of Aruba Central? (Select two.)

It must be deployed as an on-premises server.

It manages networking equipment using SNMP.

It manages networking equipment using HTTPs.

It can manage third-party networking equipment.

It is considered cloud-based network management.

NO.32 Which command should you enter to access the second interface of a one-rack-unit standalone ArubaOS-CX switch?

Interface 0/0/2

Interface 1/0/2

Interface 1/1/2

Interface 0/1/2

NO.33 Which statement accurately describes an omnidirectional antenna?

Radiates equal power in all directions in the Elevation Plane.

Radiates almost equal power in all directions in the Vertical Plane.

Radiates more power in a specific angle and less power in others.

Radiates almost equal power in all directions in the Horizontal Plane.

NO.34 Which device provides high ethernet port density for connecting wired clients such as computers, IP phones, and printers? (Select two.)

Wireless Router

Router

Access Point

Multilayer Switches

Switches

NO.35 Which represents a valid Basic Service Set Identifier (BSSID)?

the radio and all its associated clients

the name of the wireless network

a group of radios and all its WLAN clients

a radio’s MAC address assigned to a WLAN

NO.36 Which command should you enter to access the second interface of the third slot in a modular ArubaOS-CX switch?

Interface 0/3/2

Interface 0/2/3

Interface 1/3/2

Interface 3/1/2

NO.37 Which accurately describes the 051 Model?

It is a reference model that describes data flow over the network using four layers.

It is a reference model that is used to convert binary bits into analog signals.

It is a reference model that explains how data is created by the application layer.

It is a reference model that describes how data communications occur on a network.

NO.38 What is a true statement about wireless communications using Wi-Fi?

Amplitude, phase, and frequency of radio waves are modulated to transmit data

Wireless communications have a maximum range of 10 meters (30 feet)

Amplitude, phase, and frequency of radio waves are modulated to increase range

Wireless communications have a minimum range of 10 meters (30 feet)

NO.39 Which Wi-Fi frame announces the Service Set Identifier (SSID) to Basic Service Set Identifier (BSSID) mapping?

association request

probe request

beacon

network allocation vector

NO.40 Which protocol performs name to IP resolution?

DHCP

FTP

DNS

LLDP

NO.41 On which connection type are collisions more likely to happen?

Dark Fiber

Fiber

Copper

Wi-Fi

NO.42 Which organization provides certifications that ensure interoperability between WLAN vendors?

Institute of Electrical and Electronics Engineers

Federal Communications Commission

Wi-Fi Alliance

Internet Engineering Task Force

Explanation
https://www.wi-fi.org/certification

NO.43 Which statements are true about a router? (Select two.)

They are considered layer two devices.

They utilize protocols to learn all possible paths.

They are considered layer four devices.

They are considered layer three devices.

They analyze source addresses to learn paths.

NO.44 Which configurable switchport feature makes collisions impossible to occur?

auto speed

VLANs

full-duplex

half-duplex

NO.45 What are the nonoverlapping channels for Wi-Fi communications in the 2.4 Ghz band?

1,6,11,andl3

1,6, and 11

1.7,11, and 14

1,7, and 13

NO.46 Which table must clients populate to remember the L2 addressing of their neighbors?

MAC Table

ARP Table

Routing Table

Ethernet Table

NO.47 WhichOSImodel layer is in charge of creating data?

Physical

Transport

Layer 4

Layer 7

NO.48 Why do clients run the Address Resolution Protocol (ARP)?

To discover the destination address of the Layer 3 header of IP packets.

To discover the source address of the Layer 3 header of IP packets.

To discover the destination address of the Layer z header that encapsulates IP packets.

To discover the source address of the Layer z header that encapsulates IP packets.

NO.49 Which protocols operate on the Management Plane? (Select two.)

Transmission Control Protocol

Address Resolution Protocol

Spanning Tree Protocol

Hypertext Transfer Protocol Secure

Secure Shell

NO.50 You connect a computer to the network. Assuming you have configured a static address to its NIC, what protocols will the computer run in order to establish a secure web connection to YouTube.com?

DNS and HTTPS

DHCP, FTP, and HTTP5

DHCP, DNS, and HTTPS

DHCP and https

FTP and https

NO.51 At which section of the Aruba Central WLAN configuration Wizard can you set the Role Based controls?

Access

VLANs

Security

General

NO.52 Which commands are required to configure interfaces 1 /1/1 and 1 /1/2 as VLAN 10 access ports in ArubaOS-CX switches?

Option A

Option B

Option C

Option D

NO.53 What do the digits in the ArubaOS-CX switch interface numbering represent?

Member/Slot/Port

Slot/Member/Port

Stack/Member/Port

Module/Slot/Port

NO.54 What are the key differences between L2 switches and routers? (Select two.)

Switches build an ARP table, while routers build a port table.

Switches build a MAC table while routers build a routing table.

Switches are considered L2 devices, while routers are L4.

Switches offer a considerably higher port density than routers.

Routers offer a considerably higher port density than switches.

Loading …

Download Exam HPE3-U01 Practice Test Questions with 100% Verified Answers: https://www.testsimulate.com/HPE3-U01-study-materials.html

HP HPE3-U01 Exam Syllabus Topics:

Leave a Reply Cancel reply