Try Free and Start Using Realistic Verified 350-601 Dumps Instantly [Q233-Q252]

Rate this post

Try Free and Start Using Realistic Verified 350-601 Dumps Instantly

350-601 Actual Questions – Instant Download 455 Questions

Cisco 350-601 is a new exam that’s directly geared towards the following certifications: CCIE Data Center, CCNP Data Center, and Cisco Certified Specialist – Data Center Core. In essence, this test is usually known as Implementing Cisco Data Center Core Technologies (DCCOR) and validates one’s knowledge of the most basic and common areas in the field.

NEW QUESTION 233
Refer to the exhibit.

What is the result of this series of commands?

It reboots the server immediately.

It activates the firmware on the next adapter boot.

It updates the firmware on adapter 1/1/1 immediately.

It verifies the firmware update on the server.

Section: Compute

NEW QUESTION 234
A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable. Which configuration should be applied to complete this task?

aaa authentication login default fallback error local

aaa authentication login default local

aaa authentication login console local

aaa authentication login console fallback error local

NEW QUESTION 235
Refer to the exhibit.

What is a characteristic of the UUID in the service profile presented.

based on the hardware

vendor assigned

unique system generated

allocated from a UUID pool

NEW QUESTION 236
Refer to the exhibit.

An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)

Option A

Option B

Option C

Option D

Option E

NEW QUESTION 237
An engineer is using REST API calls to configure the cisco APIC. Which data structure must be used within a post message to receive a login token?

Explanation

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/ b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_0

NEW QUESTION 238
An engineer needs to make an XML backup of Cisco UCS Manager The backup should be transferred using an authenticated and encrypted tunnel and it should contain all system and service profiles configuration Which command must be implemented to meet these requirements?

Option A

Option B

Option C

Option D

Explanation
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/CLI_Config_Guide_1_4_1_

NEW QUESTION 239
Drag and drop the storage technologies from the left onto the correct descriptions on the right.

NEW QUESTION 240
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. What configuration should be implemented?

Option A

Option B

Option C

Option D

NEW QUESTION 241
Refer to the exhibit.

Why does the python code for Cisco NX-API print error message?

The “type” is wrong in the header of the request and should be “cli_ conf”.

NX-API does not allow configuration for features via the requests module.

The “type” is wrong is the body of the request and should be “cli_ conf”.

The JSON is not a supported format for the NX-API.

NEW QUESTION 242
Refer to the exhibit.

Which setting must be configured to prevent reuse of passwords?

No Change Interval

Change Interval

History Count

Change Count

NEW QUESTION 243
Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

Explanation
10.10.32.121/29 ,
10.10.32.122,
point-to-point ,
sparse-mode

NEW QUESTION 244

Refer to the exhibit. An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?

The switch attempts to make two TCP connections.

Compression is performed by using hardware.

Compression is performed by using software.

Mode2 is enabled by default.

Section: Storage Network
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/ip_services/ipsvc/cfcip.html

NEW QUESTION 245
Which two authentication types does Cisco UCS Manager support when configuration authentication?
(Choose two.)

local

LDAP

802.1X

Kerberos

PAM

NEW QUESTION 246
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN.
Which method does Cisco recommend to configure the SAN boot?

Define the vHBAs as bootable and leave the boot target definition empty.

Create a SAN boot policy in which every initiator is mapped to a different target LUN.

Define the vHBAs as bootable and leave the default values on the boot target definition.

Create a SAN boot policy in which every initiator is mapped to the same target LUN.

NEW QUESTION 247
Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?

Reinstall the cluster to generate the default key ring certificate

Generate a new default key ring certificate from the Cisco UCS Manager

Reboot the SSO component of the Cisco UCS Manager

Regenerate the default key ring certificate manually

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_0110.html

NEW QUESTION 248
Refer to the exhibit.

Which backup operation type does not include the Preserve Identities feature?

logical configuration

system configuration

full state

all configuration

NEW QUESTION 249
When a strict CoPP policy is implemented, which statement describes an event during which packets are dropped?

A large system image is copied to a switch by using the default VRF.

Fifteen SSH sessions remain connected to the switch.

A ping sweep is performed on a network that is connected through a switch.

A web server that is connected to a switch is affected by a DDoS attack.

Section: Security

NEW QUESTION 250
A network engineer is configuring the Cisco UCS service profile template with Ansible using this code.

Which attribute must be used to apply the iSCSI initiator identifiers to all iSCSI vNICs for the service profiles derived from the service template?

san_connectivity_policy

boot_policy

lan_connectivrty_policy

iqn_pool

NEW QUESTION 251
An engineer is implementing FCoE.
Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?

It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.

It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.

It provides the authentication of peers on the Cisco Nexus switch.

It always is enabled on 10/100-Mbps native Ethernet ports.

Section: Storage Network
Explanation/Reference:

NEW QUESTION 252
An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two)

write

verify

commit

checkpoint

apply

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_7sessionmgr.html

Loading …

The Cisco 350-601 DCCOR exam is a professional-level certification exam that tests the knowledge and skills of candidates in implementing core data center technologies. It is designed for network engineers, network administrators, and other IT professionals who wish to validate their skills in planning, implementing, and managing data center technologies. The exam covers a wide range of topics, including network design, virtualization, automation, security, and storage.

The Cisco 350-601 certification exam is ideal for IT professionals who have experience in data center technologies and want to validate their skills and knowledge. It is also suitable for network engineers, system administrators, and data center architects who want to enhance their expertise in the latest data center technologies.

Download Free Latest Exam 350-601 Certified Sample Questions: https://www.testsimulate.com/350-601-study-materials.html

Leave a Reply Cancel reply