Fortinet NSE4_FGT_AD-7.6 Exam Dumps [2026] Practice Valid Exam Dumps Question [Q48-Q67]

5/5 - (2 votes)

Fortinet NSE4_FGT_AD-7.6 Exam Dumps [2026] Practice Valid Exam Dumps Question

NSE4_FGT_AD-7.6 Dumps – Grab Out For [NEW-2026] Fortinet Exam

Fortinet NSE4_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Routing: This domain covers configuring static routes for packet forwarding and implementing SD-WAN to load balance traffic across multiple WAN links.
Topic 2	VPN: This domain focuses on implementing meshed or partially redundant IPsec VPN topologies for secure connections.
Topic 3	Firewall Policies and Authentication: This domain focuses on creating firewall policies, configuring SNAT and DNAT for address translation, implementing various authentication methods, and deploying FSSO for user identification.
Topic 4	Deployment and System Configuration: This domain covers initial FortiGate setup, logging configuration and troubleshooting, FGCP HA cluster configuration, resource and connectivity diagnostics, FortiGate cloud deployments (CNF and VM), and FortiSASE administration with user onboarding.
Topic 5	Content Inspection: This domain addresses inspecting encrypted traffic using certificates, understanding inspection modes and web filtering, configuring application control, deploying antivirus scanning modes, and implementing IPS for threat protection.

Q48. Refer to the exhibits, which show the system performance output and the default configuration of high memory usage thresholds in a FortiGate.

Based on the system performance output, what can be the two possible outcomes? (Choose two.)

FortiGate will start sending all files to FortiSandbox for inspection.

Administrators can access FortiGate only through the console port.

FortiGate has entered conserve mode.

Administrators cannot change the configuration.

Q49. Refer to the exhibit.

An administrator has created a new firewall address to use as the destination for a static route. Why is the administrator not able to select the new address in the Destination field of the new static route? (Choose one answer)

In the new static route, the administrator must select Named Address.

In the new firewall address, the FQDN address must first be resolved.

In the new static route, the administrator must first set the interface to port2.

In the new firewall address, Routing configuration must be enabled.

Q50. Refer to the exhibit. What would be the impact of these settings on the Server certificate SNI check configuration on FortiGate?

FortiGate will accept and use the CN in the server certificate for URL filtering if the SNI does not match the CN or SAN fields.

FortiGate will accept the connection with a warning if the SNI does not match the CN or SAN fields.

FortiGate will close the connection if the SNI does not match the CN or SAN fields.

FortiGate will close the connection if the SNI does not match the CN and SAN fields

Q51. An administrator wants to form an HA cluster using the FGCP protocol.
Which two requirements must the administrator ensure both members fulfill? (Choose two.)

They must have the same HA group ID.

They must have the heartbeat interfaces in the same subnet.

They must have the same number of configured VDOMs.

They must have the same hard drive configuration.

Q52. You have configured an application control profile, set peer-o-peer traffic to Block under the Categories tab, and applied it to the firewall policy. However, you peer-to-peer traffic on known ports is passing through the FortiGate without being blocked. What FortiGate settings should you check to resolve this issue?

Replacement Messages for UDP-based Applications

Network Protocol Enforcement

Application and Filter Overrides

FortiGuard category ratings

Q53. Refer to the exhibit. Why is the Antivirus scan switch grayed out when you are creating a new antivirus profile for FTP?

None of the inspected protocols are active in this profile.

FortiGate, with less than 2 GB RAM, does not support the Antivirus scan feature.

Antivirus scan is disabled under System -> Feature visibility.

The Feature Set for the profile is Flow-based but it must be Proxy-based.

Q54. A new administrator is configuring FSSO authentication on FortiGate using DC Agent Mode. Which step is not part of the expected process?

The DC agent sends login event data directly to FortiGate.

FortiGate determines user identity based on the IP address in the FSSO list.

The collector agent forwards login event data to FortiGate.

The user logs into the windows domain.

Q55. Refer to the exhibit.

FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.
Which action must the administrator perform to consolidate the two policies into one?

Select port1 and port2 subnets in a single firewall policy.

Create an Aggregate interface that includes port1 and port2 to create a single firewall policy.

Replace port1 and port2 with the any interface in a single firewall policy.

Enable Multiple Interface Policies to select port1 and port2 in the same firewall policy.

Q56. Which two statements are correct when the FortiGate device enters conserve mode? (Choose two.)

FortiGate refuses to accept configuration changes.

FortiGate halts complete system operation and requires a reboot to regain available resources.

FortiGate continues to transmit packets without IPS inspection when the fail-open global setting in IPS is enabled.

FortiGate continues to run critical security actions, such as quarantine.

Q57. An administrator has configured a dialup IPsec VPN on FortiGate with add-route enabled.
However, the static route is not showing in the routing table.
Which two statements about this scenario are correct? (Choose two.)

The administrator must enable a dynamic routing protocol on the dialup interface.

The administrator must use a policy route instead of a static route for add-route to work properly.

The administrator must ensure phase 2 is successfully established.

The administrator must define the remote network correctly in the phase 2 selectors.

Q58. Refer to the exhibit.

As an administrator you have created an IPS profile, but it is not performing as expected. While testing you got the output as shown in the exhibit What could be the possible reason of the diagnose output shown in the exhibit?

There is a no firewall policy configured with an IPS security profile.

Administrator entered the command diagnose test application ipsmonitor 5.

FortiGate entered into IPS fail open state.

Administrator entered the command diagnose test application ipsmonitor 99.

Q59. Refer to the exhibit.

You are configuring FortiAnalyzer on FortiGate.
Which step must you take to connect FortiAnalyzer to FortiGate?

Verify the FortiAnalyzer serial number.

Enable disk logging on FortiGate.

Authorize FortiGate on FortiAnalyzer.

Configure UDP port 514 on FortiGate.

Q60. Which three statements about SD-WAN performance SLAs are true? (Choose three.)

They rely on session loss and jitter.

They can be measured actively or passively.

They are applied in a SD-WAN rule lowest cost strategy.

They monitor the state of the FortiGate device.

All the SLAtargets can be configured.

Q61. Refer to the exhibits. The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.

Based on the system performance output, what are the two possible outcomes? (Choose two.)

FortiGate has entered conserve mode.

Administrators can access FortiGate only through the console port.

Administrators can change the configuration.

FortiGate drops new sessions.

Q62. A FortiGate administrator is required to reduce the attack surface on the SSL VPN portal.
Which SSL timer can you use to mitigate a denial of service (DoS) attack?

SSL VPN http-request-header-timeout

SSL VPN dtls-hello-timeout

SSL VPN login-timeout

SSL VPN idle-timeout

Q63. Refer to the exhibits. An administrator wants to add HQ-ISFW-2 in the Security Fabric. HQ-ISFW-
2 is in the same subnet as HQ-ISFW. After configuring the Security Fabric settings on HQ-ISFW-
2, the status stays Pending.

What can be the two possible reasons? (Choose two.)

Upstream FortiGate IP must be set to 10.0.11.254.

SAML Single Sign-On must be set to Manual.

HQ-ISFW-2 must be authorized on HQ-ISFW.

Management IP must be set to 10.0.13.254.

Q64. Refer to the exhibits.

An administrator wants to add HQ-ISFW-2 in the Security Fabric. HQ-ISFW-2 is in the same subnet as HQ-ISFW. After configuring the Security Fabric settings on HQ-ISFW-2, the status stays Pending. What can be the two possible reasons? (Choose two answers)

Upstream FortiGate IP must be set to 10.0.11.254.

SAML Single Sign-On must be set to Manual.

HQ-ISFW-2 must be authorized on HQ-ISFW.

Management IP must be set to 10.0.13.254.

Q65. Refer to the exhibits. The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.

Based on the system performance output, what are the two possible outcomes? (Choose two.)

FortiGate has entered conserve mode.

Administrators can access FortiGate only through the console port.

Administrators can change the configuration.

FortiGate drops new sessions.

Q66. An administrator manages a FortiGate model that supports NTurbo.
How does NTurbo acceleration enhance antivirus performance?

For proxy-based inspection, NTurbo offloads traffic to the content processor.

For flow-based inspection, NTurbo establishes a dedicated data path to redirect traffic between the IPS engine and FortiGate ingress and egress interfaces.

For proxy-based inspection, NTurbo buffers the whole file and then sends it to the antivirus engine.

For flow-based inspection, NTurbo creates two inspection sessions on the FortiGate device.

Q67. Which statement correctly describes NetAPI polling mode for the FSSO collector agent?

The collector agent uses a Windows API to query DCs for user logins.

NetAPI polling can increase bandwidth usage in large networks.

The NetSessionEnum function is used to track user logouts.

The collector agent must search Windows application event logs.

NSE4_FGT_AD-7.6 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://www.testsimulate.com/NSE4_FGT_AD-7.6-study-materials.html

Fortinet NSE4_FGT_AD-7.6 Exam Syllabus Topics:

Leave a Reply Cancel reply